Thread: Newbie Questions

My 95 only has tail and blinker lights in the bumper.

You will find there is power for tail lights still goes to the body lights, so if you want tail lights at both it can easily be wired. Not sure about blinkers tho.

My 99 S1 has both high and low lights all wired and working. Dont know if it was done by the PO, I thought they all were like mine.

Dave

For the blinkers there are 3 variations AFAIK.
The pre update 91to 93ish had them up in the body.
The post update 94 to 96ish had them in the bumper.
The post update 95 to 98ish had them in both body and bumper.

As said previously you can wire up the body tail lights easily enough. Everything else needed is already fitted.
If you want body blinkers you will need to buy the later or earlier assembley.

For the transmission slowing to a stop clunk, mine did that and it was my handbrake dragging. Mine is a manual but would be worth adjusting it anyway.

Thanks for all the replies, much appreciated.

I won't worry about the 2nd set of indicators, if all I need legally are the ones on the bumper bar.

Still lots of little DIY things to do, before I let the pro's raid my wallet.

Will keep you's posted on the progress.

Regards
Rich

Hi all,

Anybody use their Gerni with the suds bottle full of degreaser to clean oil leaks from underneath their vehicle.

Regards
Rich

Haven't used the suds bottle for it yet. I've just used $2 cans of degreaser, then pressure washed it off.

Originally Posted by OlliesLRover

Hi all,

Anybody use their Gerni with the suds bottle full of degreaser to clean oil leaks from underneath their vehicle.

Regards
Rich

Yes it works well in the areas it reaches.
The wand on mine is too long to get into the tighter spots.

Many thanks
Rich