-
4th July 2014, 04:40 PM
#1
STUCK TORQUE CONVERTER
Hi,have finally managed to pull out my auto box but the torque converter seems stuck to the engine.ANYideas?Its a 300tdi
-
4th July 2014, 04:45 PM
#2
It bolts (4 bolts) to the flex plate. Bolts accessible from the front side of the plate. Need to to rotate as required. Check the plate for cracks while it's off (separate step to unbolt it from the crank boss).
-
4th July 2014, 07:12 PM
#3
Also check the tangs on the convertor and the front pump driveshafts for damage, leaving the torque convertor on the flex plate when removing the gearbox may cause some damage, Regards Frank.
-
5th July 2014, 09:45 PM
#4
Also be careful.
It's bloody heavy and you WILL need someone to hod it while removing the last bolts. If it hits you in the head you'll know all about it and we may never hear about it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks