Thread: 300tdi injector pump leak question

There are several.potential leaking points

The throttle shaft
The plate seal.that has the throttle shaft
The compensator cab leak into thecompe Sat or and then out the atmospheric vent.
The inlet and outlet fittings fan leak
The primary shaft seal can leak
The distribution head to bid seal can leak
The injector line union fitting can leak as can their mounts
Any of the screw cover fitting or retaining fitting by that locate an internal piece from the outside can leak.

Originally Posted by Blknight.aus

There are several.potential leaking points

The throttle shaft
The plate seal.that has the throttle shaft
The compensator cab leak into thecompe Sat or and then out the atmospheric vent.
The inlet and outlet fittings fan leak
The primary shaft seal can leak
The distribution head to bid seal can leak
The injector line union fitting can leak as can their mounts
Any of the screw cover fitting or retaining fitting by that locate an internal piece from the outside can leak.

I have a off and on leak, it was leaking (and I did nothing to fix it) and now it doesn't seem to. But I was told that there is no seal kits, the only options was to shell out $1200 to refurbish the unit. True?

False.

The seal kits are so common you can get them from eBay sometimes.

Pretty sure the v m diesel in Queensland is the name of the pce I get my kits from.

Do an advanced aulro search using all posts by my user name And use diesel seal kit s the search words that should get you a post with the bne of the company..

(is search it for you. It my internet is slower than all he'll up here and. I'm nearly out of data on the phone.

Bosch seal kit #1 467 010 467
Throttle spindle bush 1460324333


The throttle bush seal and the top cover gasket are the ones that usually leak and are fixable by DIY.


Gasket and o-ring can be ordered separate.
Oring 1460210008
cover gasket 1461015302


They also have the fuel spill rubber hose for between the injectors.


KM Diesel very helpful people,
Address: 6/50 Kremzow Road, Brendale QLD 4500
Phone:(07) 3205 1633

That's the mob I use for my kits.

Or from ebay http://www.ebay.com/itm/161368834928?_trksid=p2055119.m1438.l2649&ssPageNa me=STRK%3AMEBIDX%3AIT

KM Diesel - are they viton rubber? My understanding is that viton is more tolerant of the low sulphur (if I've got my facts right).

Some years ago I got a viton rubber refurb kit from Sydney Diesel Centre 02 9681 7700.

Km diesels got the good stuff.

If their seals stand up against the crap I use as fuel I don't thing they'll be upset by the lack of sulpher.