Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Abit unsure of exactly what model my landy is

  1. #21
    Join Date
    Aug 2012
    Location
    Braidwood, NSW
    Posts
    308
    Total Downloaded
    0
    As per the picture above, your build plate should be on the radiator support panel. It will have "BUILT" at the top with the month and year stamped next to it.

    Chris
    -------------------------
    Chris Phillips


    Offroader: 1996 Discovery 300TDI (The Green Donkey)
    Missus: 2010 Discovery 4 TDV6 (Fancy thing)
    Just 'cause: 1999 Discovery SE 3.9L V8 (Makes fun noises, sometimes...)
    Spares: 1998 Discovery 300TDI (Only vehicle actually in the garage..........)

    Run around:
    2001 Nissan Pulsar ST 1.8L (Soul crusher)

  2. #22
    DiscoPaul Guest
    sorry for the delay, heres a pic of the only plates i could find under the bonnet, was nothing on the passengers side and still can't find a date anywhere.



    Last edited by DiscoPaul; 1st December 2014 at 04:48 PM.

  3. #23
    sheerluck Guest
    Paul, that definitely is a compliance date of 1/99 (January 1999). And it's a little difficult to tell from the photo, but I think the tenth and eleventh characters of the VIN are WA, which would signify a 1998 MY Discovery 1.

  4. #24
    DiscoPaul Guest
    haha thanks mate! i'm such an idiot, i mistook the 1/99 (think i better get some new glasses) thought it was 1799

  5. #25
    Join Date
    Oct 2007
    Location
    Perth Hills, WA
    Posts
    84
    Total Downloaded
    0
    Quote Originally Posted by DiscoPaul View Post
    haha thanks mate! i'm such an idiot, i mistook the 1/99 (think i better get some new glasses) thought it was 1799
    Hey mate, yours is 136 vehicles older than mine (almost twins). Mine was manufactured in May 1998 but I took delivery and was first registered in Jan 1999 so is considered a 99 model but I still call it a '98. I was told if I sold it, it could be legitimately advertised as a 99 model but I always thought (quite rightly as it turns out) that that would just lead to confusion..
    Mine is an SE model which had a bit extra fruit added as a run-out incentive over the base S model. (5 x alloys, D/Side SRS, Alarm & remote locking and slightly upgraded stereo)

    Cheers,

    Chookie
    '98 (or '99) 300Tdi Disco

  6. #26
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Yep definitely 1/99 - I am surprised the build date was not stamped on the Landrover build plate above the VIN - most likely around Oct 98.

    Cheers

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  7. #27
    DiscoPaul Guest
    126 is pretty close, were both probably parked in the same factory car park at some point after production... must admit i was surprised it wasn't on the the vin as well, think thats what caught me out.

  8. #28
    Join Date
    Dec 2006
    Location
    Barmera .SA.
    Posts
    1,841
    Total Downloaded
    0
    From the photo's it looks more like a D1 update than the original D1.

    It seems to have the cut aways in the upper inner corners of the headlights, the original D1 had full rectangular lights with no cut away. I know because I had to return the wrong model headlight for my Oct\93 D1 a while back.

  9. #29
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    supposedly face lifted D1's only had indicators in the bumper not in pillars but a google shows that some did and some didnt.
    Mine has and they are factory fitted but yet others with 95-98 D1's dont have indicators in the pillars.
    Only 1995MY (MA) cars had the single set of rear indicators. The 1996-1998MY cars had both bar & pillar indicators.
    Scott

  10. #30
    DiscoPaul Guest
    just had a look and the headlights do have a cut away on the top inner corner, i used to have an early discovery about 10 years ago and i think thats something that confused me with the model as this one looks different to that

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!