Results 1 to 4 of 4

Thread: Washing out the TC

  1. #1
    Join Date
    Jan 2013
    Location
    Penrith
    Posts
    922
    Total Downloaded
    0

    Washing out the TC

    Hi all got my spare LT230 on the bench doing the seals and gaskets, can I fill it full of diesel to wash it out while its open

    1428670451346.jpg

    Sent from my GT-I9305 using AULRO mobile app

  2. #2
    Join Date
    Jan 2009
    Location
    Seymour, Victoria.
    Posts
    751
    Total Downloaded
    0
    Yes. No problems as long as you are going to strip anyway and clean,dry reusable components. I guess you are replacing bearing as part of the rebuild.
    Post up photos of your progress. It would be interesting.

  3. #3
    Join Date
    Jan 2013
    Location
    Penrith
    Posts
    922
    Total Downloaded
    0
    Actually I wasnt going to strip it, just pull off all covers replace gaskets and seals, was looking inside and thought I could just fill it with diesel to wash it out

    Sent from my GT-I9305 using AULRO mobile app

  4. #4
    Join Date
    Jan 2009
    Location
    Seymour, Victoria.
    Posts
    751
    Total Downloaded
    0
    Then I probably wouldn't. You wouldn't be able to dry the internals well enough for my liking. It probably wouldn't dilute the new oil badly enough to cause a problem but I wouldn't like to take the chance. You could get some flushing oil and run that though. But unless you have a known problem just clean as best you can or strip and clean completely.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!