Page 16 of 26 FirstFirst ... 61415161718 ... LastLast
Results 151 to 160 of 260

Thread: New Cylinder Head

  1. #151
    Join Date
    Apr 2015
    Location
    Morgan, SA
    Posts
    242
    Total Downloaded
    0
    Quote Originally Posted by Fausto79 View Post
    where was measurement taken though? at head or thermo housing bung or elsewhere?
    Very good point.....

  2. #152
    Join Date
    Apr 2015
    Location
    Morgan, SA
    Posts
    242
    Total Downloaded
    0
    Here I am on a ferry...the thing drops to 76C, taken from top radiator hose.
    Attached Images Attached Images

  3. #153
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    lazy thermostat, stop panicing. its just being a little tardy to open.

    if your cooling system is perfectly capable of holding its 14 psi you can go 105 before you have to worry with just straight water, with coolant mixed properly you can go 115 and your limit is around 120.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  4. #154
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    lazy thermostat, stop panicing. its just being a little tardy to open.

    if your cooling system is perfectly capable of holding its 14 psi you can go 105 before you have to worry with just straight water, with coolant mixed properly you can go 115 and your limit is around 120.
    i have another here which i know opens at to 90C ish mark, might pull the one i have out and change it to the other. once these people leave my house i will finish the ems2 setup so i can keep an eye out for the head temps.

  5. #155
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    leave it, do some short trips it might smooth out, its doing what you want it to do when you finally put the heater back in for winter. Trust me on that.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  6. #156
    Join Date
    Apr 2015
    Location
    Morgan, SA
    Posts
    242
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    lazy thermostat, stop panicing. its just being a little tardy to open.

    if your cooling system is perfectly capable of holding its 14 psi you can go 105 before you have to worry with just straight water, with coolant mixed properly you can go 115 and your limit is around 120.
    Its a Land rover...I have good reason to be permanently paranoid!!!

  7. #157
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    its a confidence and experience thing...

    relax some, so long as the coolant temp is coming down when you need it to, the expansion tank stays full, doesnt spurt coolant and the thing doesnt stay over 100 at high idle you've got it covered.

    I promise, if you ever come for a ride in the lectured D1 you're never going to worry about your cooling system ever again if I take you for a "sprirted" drive"

    keep an eye on it, keep it under 105 keep it full. easy.

    (those numbers work for both speed and fuel as well as temperature and coolant)
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  8. #158
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    its a confidence and experience thing...

    relax some, so long as the coolant temp is coming down when you need it to, the expansion tank stays full, doesnt spurt coolant and the thing doesnt stay over 100 at high idle you've got it covered.

    I promise, if you ever come for a ride in the lectured D1 you're never going to worry about your cooling system ever again if I take you for a "sprirted" drive"

    keep an eye on it, keep it under 105 keep it full. easy.

    (those numbers work for both speed and fuel as well as temperature and coolant)
    only reason i worry is that everyone always says how long these things take to heat up and mine was the same previously with a pretty much completely blocked cooling system and now everything new and it heats up quicker than my 2005 honda accord. that combined with the fact that i have a brand new $1000k + cylinder head is what makes me cautious.

    i will take your advice and do short trips and keep a close eye on it. only after ive finished setting up the ems2 though. the guests leave in 2 days and then i will get back on it and solve this.

  9. #159
    Join Date
    Apr 2015
    Location
    Morgan, SA
    Posts
    242
    Total Downloaded
    0
    Mine takes ~10min of driving for the thermostat to open and the gauge shows 78C when that happens as that's where it stays unless hills, AC, or higher top speed etc. I'm paranoid when it gets to 85C.

  10. #160
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    other thing i need to do is tap a bigger thread or install a helicoil to the top bolt on the water pump (the one that also holds bracket with hose clip and protects it from belt). the new (secondhand) housing i bought gave way very easily when i did up that bolt. there is a bit of thread left on the end which just gives a bit of tension but not enough for my liking or to instally the bracket properly.

    wondering whether i can just drill slightly bigger hole and tap it upto m12 or m10 depending on what the size is now, without taking pump off.

Page 16 of 26 FirstFirst ... 61415161718 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!