Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Discovery 1 loadspace led lighting pictures needed

  1. 4th November 2015, 01:17 PM #1
    Luke56000's Avatar
    Luke56000
    Luke56000 is offline Fossicker
    Join Date
    Sep 2013
    Location
    Whyalla
    Posts
    38
    Total Downloaded
    0

    Discovery 1 loadspace led lighting pictures needed

    Hi everyone, Just after some photos of load space led light strips people have set up, I've just ordered a set that I'll be installing on my boat and on the load space of my discovery, I've tried using the search function for this site and google and most of the things I've come across have been people describing what they've done or the thread has been so old the picture had expired

    How have you mounted the wire for it? is there a spot further up the pillar where you can put the wiring through or do you have to run the wire right down to the current lighting before being able to take it behind the moulding
    Reply With Quote Reply With Quote
  2. 4th November 2015, 05:57 PM #2
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0

    Wink

    Following with interest....
    Reply With Quote Reply With Quote
  3. 4th November 2015, 06:13 PM #3
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Simplest improvement is to replace the globe with an led circuit board.

    Sent from my GT-I9300 using AULRO mobile app
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  4. 4th November 2015, 07:46 PM #4
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Simplest improvement is to replace the globe with an led circuit board.

    Sent from my GT-I9300 using AULRO mobile app
    The Light in the back on the side is really in the wrong position.... U really need a light on the roof somewhere....
    Reply With Quote Reply With Quote
  5. 4th November 2015, 08:20 PM #5
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,496
    Total Downloaded
    0
    Mine are mounted on the underside of the top of the rear window frame in the curves. the wiring goes through the frame of the door and the feed tube for the rear window heat and top stop light. from there down inside the rear trim to the internal cargo light. theres a swtich on the door and an earth switch so if you forget to turn them off they automatically isolate.

    I also have a drop table in place of the back door trim.

    Hanging from the child seat restraints is my work light.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 4th November 2015, 09:44 PM #6
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Quote Originally Posted by Robmacca View Post


    The Light in the back on the side is really in the wrong position.... U really need a light on the roof somewhere....
    Roof light not the ****y side light.

    Sent from my GT-I9300 using AULRO mobile app
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  7. 4th November 2015, 10:39 PM #7
    Landover's Avatar
    Landover
    Landover is offline Wizard Supporter
    Join Date
    Aug 2009
    Location
    Sunbury Victoria
    Posts
    1,133
    Total Downloaded
    0
    I'm with Loanrangie, I put one of those SMD LED boards in the roof light in the back of the D1 and D2. Very bright. I previously put in an LED bar and wired it up but after the LED board it did not need it. Very easy to install.


    Useful CAR Interior Light Panel 48 SMD LED T10 Dome Bulb BA9S Adapter 12V DC | eBay
    Cheers, David.
    My Land Rover has made me a better Mechanic........
    D2 TD5 Manual, CDL, Detroit Rear, Truetac Front, 2" OME lift, 32" MT Tyres, ARB Bull Bar, Winch, TJM Roof Rack, Driving Lights, Dual Batteries, ARB Side Steps, Rear Draws, Uhf.
    Reply With Quote Reply With Quote
  8. 5th November 2015, 12:43 AM #8
    Luke56000's Avatar
    Luke56000
    Luke56000 is offline Fossicker
    Join Date
    Sep 2013
    Location
    Whyalla
    Posts
    38
    Total Downloaded
    0
    Quote Originally Posted by Landover View Post
    I'm with Loanrangie, I put one of those SMD LED boards in the roof light in the back of the D1 and D2. Very bright. I previously put in an LED bar and wired it up but after the LED board it did not need it. Very easy to install.


    Useful CAR Interior Light Panel 48 SMD LED T10 Dome Bulb BA9S Adapter 12V DC | eBay
    Where does this light fit? are you talking about the light fitting thats above the back seats or installing another fitting on the roof over the loadspace, the only light I have in the loadspace I have at the moment is the little side light which is already practically useless now but once you actually use the loadspace as intended (I.E Loading basicly anything in it) that light is covered and basicly useless
    Reply With Quote Reply With Quote
  9. 5th November 2015, 09:00 AM #9
    Landover's Avatar
    Landover
    Landover is offline Wizard Supporter
    Join Date
    Aug 2009
    Location
    Sunbury Victoria
    Posts
    1,133
    Total Downloaded
    0
    Myself and loan range have update D1's. The light is on the roof in the load space. Maybe some don't have them. I ran a wire up the pillar from the side light and mounted some SMD LED stip lighting on the plastic mould above the door. That worked ok as well.
    Cheers, David.
    My Land Rover has made me a better Mechanic........
    D2 TD5 Manual, CDL, Detroit Rear, Truetac Front, 2" OME lift, 32" MT Tyres, ARB Bull Bar, Winch, TJM Roof Rack, Driving Lights, Dual Batteries, ARB Side Steps, Rear Draws, Uhf.
    Reply With Quote Reply With Quote
  10. 5th November 2015, 07:50 PM #10
    WillsTdi
    WillsTdi is offline Master Subscriber
    Join Date
    Feb 2015
    Location
    Western Sydney
    Posts
    172
    Total Downloaded
    0
    I just hang one of those flexy waterproof LED camping strip lights from the cargo barrier. Plugged into a socket on the aux batter case, and has its own inline waterproof switch. :-)
    Cheers William
    '98 Discovery Tdi SE7 *SOLD*
    '05 BMW R1150 GS Adventure
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Disco 1 spongy brakes after pad inspection | Condenser Fan Relay Location »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!