Page 5 of 11 FirstFirst ... 34567 ... LastLast
Results 41 to 50 of 106

Thread: Failing to reach 3000rpm

  1. 27th February 2016, 11:42 PM #41
    Fausto79's Avatar
    Fausto79
    Fausto79 is offline Wizard
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    you may also need to do it with the engine running, the easy way of doing it is to remove the return line from the IP and flow it into a bottle, if its coming out areated youve got problems and this may be the cause of your ticking noise
    if its coming aerated from IP does this mean the IP is stuffed? or somewhere else. this is pretty new only had it replaced 1.5yrs ago roughly. not sure if it always ran like this or just after i did the work. pretty sure tacho has always been below 3k. never revved too high.
    Reply With Quote Reply With Quote
  2. 28th February 2016, 10:07 AM #42
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    no it just means that air is getting into the fuel system somewhere and you need to find out where.

    if the fuel coming out of the IP return line is bubble free then air is not getting into the system from anywhere between the tank pick up and the injector pump.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 28th February 2016, 10:09 AM #43
    123rover50's Avatar
    123rover50
    123rover50 is offline YarnMaster Supporter
    Join Date
    Jun 2009
    Location
    Queensland
    Posts
    3,434
    Total Downloaded
    0
    Has he got a boost gauge?
    Whats his boost?
    Reply With Quote Reply With Quote
  4. 28th February 2016, 12:42 PM #44
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    boost has no effect on the engine hitting full rated RPM under no load conditions.

    I think he reported boost numbers over in the head change thread.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  5. 28th February 2016, 01:05 PM #45
    Fausto79's Avatar
    Fausto79
    Fausto79 is offline Wizard
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    Quote Originally Posted by 123rover50 View Post
    Has he got a boost gauge?
    Whats his boost?
    have boost gauge but wired it wrong and still have not rectified it. 1hr job but many things on.
    Reply With Quote Reply With Quote
  6. 3rd March 2016, 05:01 PM #46
    BathurstTom
    BathurstTom is offline Master Supporter
    Join Date
    Dec 2012
    Location
    Stuart Town
    Posts
    851
    Total Downloaded
    0
    What if I have no fuel coming out of the return line - is this a sign that it is starving for fuel? It will rev ok and doesn't miss, but has the dreaded tick.

    I have new seals for the sedimenter, bvut I have not put them on as yet,. I did take the sedimenter off 2-3 weeks ago and cleaned about an inch of gunk out of it.


    Thanks,
    Tom.
    1996 Disco 1 300TDI manual - Lucille a cantankerous red head! :D
    1997 Disco 1 300TDI Auto - sold
    Reply With Quote Reply With Quote
  7. 3rd March 2016, 06:19 PM #47
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    or the outlet banjo is blocked.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  8. 5th March 2016, 05:34 PM #48
    Fausto79's Avatar
    Fausto79
    Fausto79 is offline Wizard
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    Is this the return line that i take off and check for aeration? The one right in middle of pic.

    Pulled sedimenter off and cleaned it. Was actually very clean. Blew air down the lines to unblock (just in case). I'm checking the push rod right now to see if bent.p
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  9. 5th March 2016, 05:47 PM #49
    theNEWT's Avatar
    theNEWT
    theNEWT is offline Master Supporter
    Join Date
    Apr 2015
    Location
    Morgan, SA
    Posts
    242
    Total Downloaded
    0
    Looks like the IP return line to me.
    Reply With Quote Reply With Quote
  10. 5th March 2016, 06:50 PM #50
    Fausto79's Avatar
    Fausto79
    Fausto79 is offline Wizard
    Join Date
    Nov 2012
    Location
    Kingsley, Perth
    Posts
    1,045
    Total Downloaded
    0
    Yea it is. Not the right one? I thought thats the one where you would see air? Or is it before that?
    Reply With Quote Reply With Quote
Page 5 of 11 FirstFirst ... 34567 ... LastLast
« Leaking Fuel Pump Need Advice | Things you should know »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!