Thread: S1 - where is your UHF mounted?

Originally Posted by mcrover

The reason I put mine up there was so (even though you need to manuver to see it) you can see what channel your on as if you put it where the sunroof switch goes you have to turn it toward the driver to see the display as on the GME you cant read the display from the side.

It also gets the mic cable out of the way when not in use.

I ran a direct line from the fuse box, I found a fuse holder that was not in use and hooked it up to battery power from the AUX bat and ran 3mm 2 core up the right hand A pillar with the arial cable.

Im planning on putting an external speaker where the sunroof switch goes.

yhea like i said you do have a good spot put i didnt relize it wouldnt fit neatly but u do have a good point sposs

cheers

This is in a D2 but I'm pretty sure from memory that the D1 is similar.
DSCF1295-c.JPG
The rest of the radio is mounted in the back of the console. I was going to put it under the passengers seat, but there's not enough room there as there's already an amp mounted there. The other place where there is enough room to mount the back half of the radio is under the dash on the passengers side, below the glovebox. But I've mounted another fusebox here for accessories, dual battery charging for the camper trailer etc and didn't want to clutter it up any more.