Thread: Has anyone put RRC seats in a Disco?

Hi all

Has anyone fitted RRC seats in a Disco 1?

If so:

1. Was it an easy Job?
2. Will only specific year RRC seats fit into the Disco?
3. Do the RRC seats afford you a better view out of the windscreen? (ie lower bum cushion)
4. Did it help you truck go faster?

Thinking about things is dangerous to wallet!!

Jason

I put a commodore seat in the drivers side, the bolt holes for the mounts sat out side the LR mounts.
We had to make it that the new seat down to match the LR seat height, as the dunnydore seat (VR/VS) was wider and 25mm higher. I removed dunnydore rails and welded a plate along the length of the LR seat rail and drilled holes to bolt in to the strength plate of the new seat. Also we put in bracing blocks, I must remind you that this is NOT engineered so NOT legal but an engineer did the work for me as I took parts to him not the whole seat.

Vision is a problem as I am 6ft and look right at the bottom of the windscreen tint so next windscreen will be all clear and no problem
My car is a 91 D1 3 door so my seat tilts and I have to make sure I pull the seat belt out of the way when putting seat down next time I will use the passenger seat on the drivers side and fix that problem.
Hope this helps.