Results 1 to 8 of 8

Thread: Missing bolt?

  1. #1
    Join Date
    Mar 2007
    Location
    Tarneit VIC
    Posts
    820
    Total Downloaded
    0

    Missing bolt?

    I was looking for tranfer case breather tube and found possible a missing on the gearbox close to engine oil sump.

    So I checked RAVE it looks like it is suppose to be no bolt there.

    I was just wondering what is this hole for and is it safe when river crossing?
    Attached Images Attached Images
    Last edited by fourteen8; 15th November 2010 at 08:30 AM. Reason: forgot attachement

  2. #2
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Wading plug hole. Fit a plug only before entering deep water. Otherwise it's there to let the oil leaks out.

  3. #3
    Join Date
    Mar 2007
    Location
    Tarneit VIC
    Posts
    820
    Total Downloaded
    0
    Quote Originally Posted by bee utey View Post
    Wading plug hole. Fit a plug only before entering deep water. Otherwise it's there to let the oil leaks out.
    What sort of plug/bolt will fit? Should i just put the plug/bolt all the time and undo every service to let the oil leaks out?

  4. #4
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    I do not know about the D2 box but the earlier LT95 has a spot near the hole where the plug screws in for storage.

    The plug should not be left in as it acts as a drain for the bell housing. Only put it in when going offroad (or onroad in floods) where you are likely to be fording.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  5. #5
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Quote Originally Posted by dearot View Post
    What sort of plug/bolt will fit? Should i just put the plug/bolt all the time and undo every service to let the oil leaks out?
    Can't tell you what size, try a few bolts until you find one close. Don't put it in until it is actually needed. Ventilation is important to allow the starter etc to not collect moisture/rust duirng normal driving.

  6. #6
    Join Date
    Jul 2008
    Location
    UK
    Posts
    677
    Total Downloaded
    0
    I dont think putting a bolt in there will help anythign tbh, there is another "threadless" hole into the bell housing a few inches further forward.

  7. #7
    Join Date
    Mar 2007
    Location
    Tarneit VIC
    Posts
    820
    Total Downloaded
    0
    Quote Originally Posted by Urban Panzer View Post
    I dont think putting a bolt in there will help anythign tbh, there is another "threadless" hole into the bell housing a few inches further forward.
    So what should we do before deep river crossing?

  8. #8
    Sully Guest
    Quote Originally Posted by dearot View Post
    So what should we do before deep river crossing?
    Drive it onto the barge/raft type thing that you'll be carrying on your roof.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!