Thread: MAX Flex with Front sway bar fitted

Originally Posted by georgesadlik

Hey there CJT,

I have attached a couple of photos. I made a bracket for the top where it attaches to the sway bar and needed to enlarge the holes to a 9/16th bolt at the axle. You will also notice that i've had to 'notch' the pan hard rod mounting arm to allow for the ACE Ram to clear it on downtravel. This was just a trial fit as i will be going to rose joints instead of bushings soon to minimise the strain on the bolts at full flex. I think they are the standard height JK links. I have the receipt somewhere at home and will try to find it for part #'s.

Cheers

George

Thanks for the information.

Here is a picture of mine from a few weekends ago, pretty happy with the flex but still want more but I am sticking to a 2" - 3" lift.

I currently have Heavy Duty coils (too hard with no load) and extended Bilstein shocks.

Slowly I am going to be getting all the parts needed for a full suspension, steering and driveline rebuild and make it almost bulletproof once and for all.