Reply With QuoteThis at least prompted me to make the tool instead of using a blunt screwdriver again. Now I must make one for the D1 too. The clear pic is just me letting the autofocus do its thing.
Master
SubscriberMany thanks bee utey for the picture and measurements. I appreciate you going to all that trouble. How good it is to be able to record information with clear, detailed pictures! LRT
AT REST
This at least prompted me to make the tool instead of using a blunt screwdriver again. Now I must make one for the D1 too. The clear pic is just me letting the autofocus do its thing.
Master
Just a quick question, I refered this thread last Friday before going out bush. The main reason was that I wanted to suss out my fuel gauge behaviour and after cleaning the potentiometer, I put the pump back into the tank.
Is it normal for the fuel pump to sit proud and needing a very good push before screwing the lock ring back on? What a mongrel to get back in!!
AT REST
Install the rubber ring in the tank, then you need to lubricate the top section of the pump assembly to enable it to slide in. I use neat dishwashing detergent myself. A fingerful of oil should do it too.Originally Posted by banarcus
Wizard
Forget the carpet, just do this
http://www.aulro.com/afvb/technical-...-rug-d2-2.html
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks