I'll get this one in before someone else does,
TURN THE RADIO UP really loud and you won't hear it![]()
Tony
03 D2a V8
I notice that when I travel on roads and there is a imperfection on the road service, my rear seats rattle, it seems like the locking catch is not holding the seat back hard enough, I mean you can rattle the seat by pulling and pushing it a little bit.
Is there anyway of tightening things up a bit.
It would drive me crazy when driving on gravel
I'll get this one in before someone else does,
TURN THE RADIO UP really loud and you won't hear it![]()
Tony
03 D2a V8
Are you talking about the third row ones stored up back or the second row just rattling.
My third row rattle and I ignore it but I took a quick look once and remember thinking that you could either jam a bit of foam in or bend the latches just a little to hold them in tighter when stored.
My second row rattle as well.. I put foam behind the seat on the side... I was actually wondering if there is a proper fix for it...
Sent from my iPhone using Forum Runner
There is a tech bulletin which covers fix to the 2nd row seats. It involved a collar with an off center hole and loctite. Bulletin 0039 from 1999.
_________________________
1996 D1 V8 - gone
2002 D2 Td5 ES- gone but still running elsewhere
2013 D4 SDV6 HSE - gone
2023 Defender 110SE D300
I had the same issue and fixed the squab by removing the black plastic conical bump stops on the underside and inserting 1 or 2 fender washers so that the catch takes up with less play.
I'll try to remeber what I did for the backrests and post it tomorrow.
I have given up on mine - the single seat rattles only when folded forward, tried rubber, foam, wedges jammed in everywhere. And it defies all my attempts to dismantle the covers and see inside.
Watching this thread with interest.....
Terry
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks