Results 1 to 4 of 4

Thread: D2 Missing CDL

  1. 6th March 2012, 10:58 AM #1
    BPTP7270
    BPTP7270 is offline Fossicker
    Join Date
    Jan 2009
    Location
    Launceston
    Posts
    38
    Total Downloaded
    0

    D2 Missing CDL

    Hi All, just looking for a bit of advice on the subject of the missing CDL. I am sure this subject will have been well and truly covered, but in all my searching of the forum, most advice seems to centre around the CDL actuator mechanism. I have recently purchased a 2002 TD5 manual and I would like to install a CDL. I am fairly certain that mine is the one with no internals, so any guidance on what path to take would be much appreciated.
    Reply With Quote Reply With Quote
  2. 6th March 2012, 01:35 PM #2
    sniegy's Avatar
    sniegy
    sniegy is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,622
    Total Downloaded
    0
    Easiest method would be to just swap the transfer case with one that has the internals required, then while its out fit the chosen mechanism to operate the CDL.

    Seeing you are in Tassie, possibly contact Justin Cooper Automotive
    Cooper Justin Independent Land Rover Specialist > Kingston TAS | White Pages Australia
    He has had years of dealing with these vehicles & may be able to assist in locating parts &/or help in any way.

    Cheers
    Reply With Quote Reply With Quote
  3. 6th March 2012, 01:59 PM #3
    northiam's Avatar
    northiam
    northiam is offline Master
    Join Date
    Jul 2010
    Location
    Hunter Valley NSW
    Posts
    750
    Total Downloaded
    0
    Or find a cdl front output housing second hand like I did.
    I was going to order this until I found output housing from a suspect transfer box.
    Ashcroft Transmissions - CDL Update Kit

    Some claim this can be changed without removal from car!
    Reply With Quote Reply With Quote
  4. 7th March 2012, 08:58 PM #4
    BPTP7270
    BPTP7270 is offline Fossicker
    Join Date
    Jan 2009
    Location
    Launceston
    Posts
    38
    Total Downloaded
    0
    A quick update on the cdl. I had a quote from a local LR specialist today and it was a ridiculous price. I talked to Justin Cooper as suggested and he sounded very knowledgeable and down to earth. He is looking into it and getting back to me in the next day or two. I had a look at the Ashcroft parts and I could do the cable assembly no problem, but the transfer internals are probably out of my depth. I could probably change the transfer case at most. If the cost is too much I will probably look at trading it for something with the CDL already in place. Thanks for the advce
    Reply With Quote Reply With Quote
« Flashing M&S lights | itermediate shaft in transfer case »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!