Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Electrical Advice Required

  1. #11
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    738
    Total Downloaded
    0
    Quote Originally Posted by mattyg View Post
    There has been a thread on this before. The abs system draws 300mA (0.3A) when key is off. You will hear it clicking in the engine bay like a cricket.
    There is a fix. Best would be to find the thread. I'm away from my pc at the moment so I can't post the link.

    (edit) just re read the first post, sorry I see that you have more than the abs draw. As others have said check altinator. The diodes and semiconductors can die and cause issues like this.
    Yes thanks, I do recall the thread on current draw but I have a much higher draw. Will have a look at the alternator next and see what I find.

  2. #12
    Tombie Guest
    What battery isolator are you running?

  3. #13
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    738
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    What battery isolator are you running?
    Traxide SC80.

    Oddly enough, I was going to do the alternator check today and before getting down there I checked the current draw again. Bugger me if it wasn't 0.09 Amps which strikes me as normal!

    Anyway, have reconnected the rear battery (it's been disconnected for a few days whilst I was running some tests) and we'll see what happens.

  4. #14
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Quote Originally Posted by Franz View Post
    Andrew,

    How much current draw are you experiencing?

    Cheers,

    Franz
    Havent measured it,mine isnt the alternator as I have replaced that.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  5. #15
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    738
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Havent measured it,mine isnt the alternator as I have replaced that.
    Andrew
    My alternator has also been replaced not too long ago.

    So, you have no idea how much current drain you have, you only know that you have a current drain because you battery goes flat after a few days of not driving the vehicle?

  6. #16
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Yes.
    It would go flat after 3 days,also has a SC80 controlling the fridge battery.
    I have a CAT 1000CCA main battery and an Optima Blue Top in the rear for the Engel.
    Since I have been using my 25AMP Ctek I can get a bit over a week without a flat battery,it proves they do improve battery stamina/life.
    I have wondered in the past if the SC80 interferes with the ECUs not shutting down,but havent gone to the effort of temporarilly disabeling the system.
    It was easier to buy the Ctek
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  7. #17
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    738
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Yes.
    It would go flat after 3 days,also has a SC80 controlling the fridge battery.
    I have a CAT 1000CCA main battery and an Optima Blue Top in the rear for the Engel.
    Since I have been using my 25AMP Ctek I can get a bit over a week without a flat battery,it proves they do improve battery stamina/life.
    I have wondered in the past if the SC80 interferes with the ECUs not shutting down,but havent gone to the effort of temporarilly disabeling the system.
    It was easier to buy the Ctek
    Andrew
    I Have just borrowed a 21 amp charger from a friend and have deduced that my 6 amp charger does not get a high enough charging voltage to fully charge either my main CAT battery or my AGM 75 ah secondary. The rejuvanting charge pumps up to 16 volts into the batteries.

    When I disconnect the SC80 my rear battery seems to hold it's voltage OK and the drain that I originally measured was from the maon battery.

    Checked the voltage tonight (both batteries linked via SC80) and had 12.5 volts after 24 hours - I'll keep checking it and also see if I can reproduce the 2.8 amp drain again.

    Cheers,

    Franz

  8. #18
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    Quote Originally Posted by schuy1 View Post
    Whilst the deeper mysteries of auto electrics eludes me I have found alternators with faulty diodes to be a power draining thief! The 'orrible little beast did what it was designed to do perfectly while the motor was running but parked in the shed it slowly drained the battery if left parked for a week . I only found it when a bearing died in it and found it in the overhaul.
    Had this happen to me a while back in a Ford Laser. It was charging ok, but the battery would be dead overnight. The alternator was the culprit as it was sucking about 4 amps when the engine was off!
    Dave.

    I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."


    1983 RR gone (wish I kept it)
    1996 TDI ES.
    2003 TD5 HSE
    1987 Isuzu County

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!