Results 1 to 7 of 7

Thread: Slight miss Td5

  1. #1
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    601
    Total Downloaded
    0

    Slight miss Td5

    Hi all,

    Today when installing my EGT guage, I started the motor with the bonnet up.
    I noticed that it was running quite rough at around 1800 rpm, I could see it vibrating a lot through the gap in the bonnet, seemed to clear at around 2500rpm.

    Plugged in the Nanocom and no faults!

    Don't notice it when driving, but it does feel a bit flat first thing until warmed up, it has always had a bit of a vibe at idle, needs new engine mounts.
    I checked the ECU plug and there was a bit of oil so cleaned that out, refitted and checked again, still there, maybe not so pronounced?.

    Took it for a spin and checked again, no where near as bad.

    It seems to be worse when cold, is it likely to be the harness?, as I thought they got worse when warm?, and tend to throw a few codes, I will change it anyway when I get chance.

    Anbody have any other obvious causes, bar the harness?

  2. #2
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    what are your maf numbers at idle?

    jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  3. #3
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    601
    Total Downloaded
    0
    Quote Originally Posted by justinc View Post
    what are your maf numbers at idle?

    jc

    Seem fine

    around 60 at idle, 600+ full throttle

    I have a new spare in the shed, I could swap them but the figures seem to be within spec?

  4. #4
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by SiddersC View Post
    Seem fine

    around 60 at idle, 600+ full throttle

    I have a new spare in the shed, I could swap them but the figures seem to be within spec?
    They are fine, what year is your Td5? EU2 or EU3?

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  5. #5
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    601
    Total Downloaded
    0
    2003 EU3

    Cyl balance is fine
    Everything seems to be working as it should?
    De-cat and EGR

  6. #6
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Has this always felt like a 'miss' when cold or hat/ trailing throttle? If so, that isn't unusual for the EU3 software, but if recent then it may require an EGR bypass kit...

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  7. #7
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    601
    Total Downloaded
    0
    Yes it has always felt a bit flat and has slight roughness (miss) when cold and at idle, I only noticed this vibe on the off chance as I had the bonnet open.
    Maybe getting a bit paranoid and reading too much into it?
    EGR and cat have gone, only did the cat last week so still getting used to it - find it a little bit noisier now, and a bit more fumey.
    I am looking at a remap soon, would this solve this issue seeing as everything else checks out and no codes have been recorded?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!