Results 1 to 9 of 9

Thread: TD5 ACCELERATOR POTENTIOMETER

  1. 28th November 2012, 07:57 PM #1
    Patrol 32
    Patrol 32 is offline Fossicker
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    51
    Total Downloaded
    0

    Question TD5 ACCELERATOR POTENTIOMETER

    Roverphiles,

    I have symptoms , not me the car, which read like the accelerator potentiometer (3 channel late model).

    Does any one know if the part can be tested or the land rover part number?

    I still can't get microcat to work, so will rebuild an old PC with XP, but that's another story.

    Thanks

    MS
    Reply With Quote Reply With Quote
  2. 28th November 2012, 08:04 PM #2
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Accelerator Pedal & Potentiometer - Td5 - Genuine Land Rover at www.rimmerbros.co.uk

    these are available locally, part number is LRO30567


    jc
    Reply With Quote Reply With Quote
  3. 28th November 2012, 10:47 PM #3
    Patrol 32
    Patrol 32 is offline Fossicker
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    51
    Total Downloaded
    0
    Thanks Justinc, I was aware of the Rimmer listed assembly. I would like to get just the electrical component if posssible.

    Do you know if there is a test for this device, maybe with or without TestBook?

    MS
    Reply With Quote Reply With Quote
  4. 29th November 2012, 05:26 AM #4
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    You should be able to monitor the voltages of the tracks with a diagnostic tool. The Nanocom allows you to do this.
    Reply With Quote Reply With Quote
  5. 4th December 2012, 02:48 PM #5
    Patrol 32
    Patrol 32 is offline Fossicker
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    51
    Total Downloaded
    0

    Talking

    Readers,

    I have found a similar part on the web, forom the US for V8 engines.

    Does anyone have the LR part no. for the TD5 accelerator potentiometer? The part is a Bosch item and has a Bosch id number, does anyone have the Bosch part no. for the TD5 item, please?

    Sorry temporarily no Microcat!

    While on the M subject, I am thinking of upgrading my Windows 7 to Pro or Ultimate which both have an XP mode which is supposed to run Microcat. Does anyone know if there is a difference in the 32 bit or 64 bit version of windows & for this purpose?

    Thanks

    Michael.
    Reply With Quote Reply With Quote
  6. 4th December 2012, 03:42 PM #6
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    Quote Originally Posted by Patrol 32 View Post
    Readers,

    I have found a similar part on the web, forom the US for V8 engines.

    Does anyone have the LR part no. for the TD5 accelerator potentiometer? The part is a Bosch item and has a Bosch id number, does anyone have the Bosch part no. for the TD5 item, please?

    Sorry temporarily no Microcat!

    While on the M subject, I am thinking of upgrading my Windows 7 to Pro or Ultimate which both have an XP mode which is supposed to run Microcat. Does anyone know if there is a difference in the 32 bit or 64 bit version of windows & for this purpose?

    Thanks

    Michael.
    The potentiometer is part of the pedal assembly. It's not available separately from LR. Can't help with the Bosch part no.

    The V8 pedal appears to have three wires, the Td5 pedal has 7 wires. From the description in RAVE it sounds like the V8 uses a single track potentiometer.

    cheers
    Paul
    Reply With Quote Reply With Quote
  7. 4th December 2012, 03:59 PM #7
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Quote Originally Posted by Patrol 32 View Post
    Readers,

    I have found a similar part on the web, forom the US for V8 engines.

    Does anyone have the LR part no. for the TD5 accelerator potentiometer? The part is a Bosch item and has a Bosch id number, does anyone have the Bosch part no. for the TD5 item, please?

    Sorry temporarily no Microcat!

    While on the M subject, I am thinking of upgrading my Windows 7 to Pro or Ultimate which both have an XP mode which is supposed to run Microcat. Does anyone know if there is a difference in the 32 bit or 64 bit version of windows & for this purpose?

    Thanks

    Michael.
    Good luck. I haven't managed to set up Microcat on my 2 year old Windows 7 64 bit (even using mturri's virtual computer tutorial option), but I believe the later models can do it a bit better. If it doesn't work out on my next model, I'll be having an old laptop and printer set up just for Microcat.
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  8. 4th December 2012, 04:12 PM #8
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    Assuming you still have an install disc for XP:

    1. Go to https://www.virtualbox.org and download a copy
    2. Create a virtual machine for XP
    2.and.a.bit Install windozzzzzzzz.
    3. Install Microcat (don't forget the extra bits from the Read Me folder)

    cheers
    Paul
    Reply With Quote Reply With Quote
  9. 4th December 2012, 04:49 PM #9
    Patrol 32
    Patrol 32 is offline Fossicker
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    51
    Total Downloaded
    0
    OffTrack,

    Thanks I have read that the later models use a three channel device so the 7 wires observation makes sense.

    I'll keep trying.

    Michael
    Reply With Quote Reply With Quote
« EGR | Rough running after degreasing injector wiring harness »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!