Reply With QuotePush the tube up inside the drain after removing the one way valve in the end (if still fitted)
13mm tubing should be fine
Swaggie
SubscriberI recall last week there was a post about the aircon drains in which someone said they would check and advise.
Seeing my XYZ switch and unis currently seem OK I would like to buy some tube and stick it on the drains.
I could see that it was more than 13MM but I didn't have my Dork torch on so couldn't see just how big. 22MM?
Regards Philip A
Master
Push the tube up inside the drain after removing the one way valve in the end (if still fitted)
13mm tubing should be fine
Wizard
Yes I recall that post. He did respond that he used 13mm clear plastic pipe from Clark Rubber. I'm tempted to give 1/2" retic pipe a try first as there is a surplus lying around at home.
PS found the post
http://www.aulro.com/afvb/discovery-...s-again-2.html
Cheers
Steve
Last edited by Rok_Dr; 20th March 2013 at 04:43 PM. Reason: spelling
TopicToaster
Garden hose works. Ask the neighbours what size it is. It's theis under mine.
Master
Supporter8mm(5/16) oil hose is the perfect fit. I had the hole fitting unplugged months ago. Smear some silicone around the end before inserting to get a good seal and to lubricate on entry.
Master
SupporterHere you go:aircon hose.jpg
Master
Supportertry again with a link:
https://www.dropbox.com/s/z9kppbk8d0...con%20hose.jpg
AT RESTRTV and a cable tie did mine.
My word O_O Thats a bit drastic, removing the gearbox to fit aircon drains!
Master
SupporterTaking the auto out is just cheatingOriginally Posted by Roverlord off road spares
RTV and a cable tie did mine.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks