Plastic panels on the door/s, the dash or ???
Hey,
just got a diso 2 2000 and its going great except for when I stop at the lights or anywhere and have my car in drive I get an annoying rattle around the passenger side of the car. I put my hand on the plastic panels and it stops vibrating but starts again as soon as I lift off.
Is this normal behaviour and how much effort would it be to dampen all of the vibration? Have you guys got it in your car?
Thanks,
Lac
Plastic panels on the door/s, the dash or ???
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
That was what I was wondering too. Which plastic panels on the passenger side can you put your hand on when you are stopped in traffic with the auto in drive?
Mine vibrates more in drive than neutral when I'm stopped at lights etc. I'm fairly sure this is down to a collapsed engine mount on the passenger side.
There is a whole range of things that can potentially vibrate:
- Engine cover
- Oil filler cover
- Cracked plenum
- Brake lines touching bodywork
- Exhaust heat shield (over muffler) - get rid of the clips and replace with panel washers top and bottom and nuts if they are loose.
- Turbo heat shield (cracked mounts)
- Turbo hose clamps hitting the inner guard
and basically anything that hasn't been bolted down properly.
cheers
Paul
Lol.
Assuming it's a Td5, if you chase vibrations you're running a looong race
Mine buzzes a fair bit at idle but both of my engine mounts are completely collapsed and have been for at least 30k kms.
Definitely more noticeable at idle though.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks