Results 1 to 5 of 5

Thread: Front diff (pinion?) end seal

  1. #1
    Join Date
    Dec 2013
    Location
    Dubai, UAE
    Posts
    29
    Total Downloaded
    0

    Front diff (pinion?) end seal

    Hi all,

    I just bought an 04 D2 / V8 and starting to have a go at the outstanding jobs that came with it.

    I've got the front driveshaft out to do a cv boot, and am thinking about doing the seal while I'm at it.

    With only one side jacked up on a stand, is it possible to do the seal without having to drain & change the diff oil?

    Also, what do you use as a drive to reseat the seal?

    Thanks.

  2. #2
    Join Date
    Dec 2013
    Location
    Dubai, UAE
    Posts
    29
    Total Downloaded
    0
    ... Anyone?

  3. #3
    redrovertdi Guest
    I have a disco 2 front diff in my 110 and did the pinion seal yesterday, drop the front tail shaft off the diff and you will need a 15mm socket to undo the flange and remove, then hook out the old seal and install the new one, on the slight angle of my driveway no oil ran out, make sure you chock your wheels.

  4. #4
    Join Date
    Dec 2013
    Location
    Dubai, UAE
    Posts
    29
    Total Downloaded
    0
    Ok thanks, but I think I might have got the name of the seal wrong...

    It's the one on the end of the diff near the hub.

  5. #5
    Join Date
    Dec 2013
    Location
    Dubai, UAE
    Posts
    29
    Total Downloaded
    0
    Update: I've since found out its called the axel - driveshaft seal, and yes it can be changed without having to drop the diff oil

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!