-
9th June 2014, 08:02 PM
#1
Taking reverse lamp wire feed to rear of van
Hi all,
Anyone see any problems in using a feed from the rear of the reverse lights to the number 2 slot on a 7 pin round to feed a wire to the rear of my van to run a reversing light there? Should be a run of about 8 metres in total. Earth will be off the rear parking lights of the van.
Cheers
-
9th June 2014, 08:28 PM
#2
That's the way I'd be doing it.
Works for the trucks at work with little 55W lights.
As they are only reverse lights they aren't on for too long.
-
9th June 2014, 08:36 PM
#3
Both of my trailers have reversing lights, never been a problem although I don't have a D2. I installed a switch into the feed wire to the socket though just in case I need to tow a trailer with a different connection to the reverse pin. The car trailer got LED lights last year and I ended up fitting a relay in the car to boost the voltage as it was a little low for the LED's taste.
-
10th June 2014, 05:59 AM
#4
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks