Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Help with my td5 fuel pressure test video ? Engine Stopping

  1. 18th July 2014, 02:47 AM #11
    sierrafery's Avatar
    sierrafery
    sierrafery is offline YarnMaster Silver Subscriber
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,782
    Total Downloaded
    0
    first thing you'll have to do is to go with tester in the immobiliser menu and prompt "learn security code" otherwise the ECU will be immobilised after the first attempt...then set the injector codes

    about the ECU number, yours being 2001 which was a transition year from EU2(10P) to EU3(15P, 16P) engines it depends, cos the MSB101192 is dedicated for EU2 10P engine and if yours is 15P it will not run the best with that ECU cos it has a different fuel map and the injectors are working at different pressure, if yours is EU2-10P engine then it's a perfect match...for your's the 100% perfect match would be MSB101340/350 though
    Reply With Quote Reply With Quote
  2. 22nd July 2014, 05:04 PM #12
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    fuel pump was replaced by time i got replacement ecu, it did not help (the pump)

    With the replacement ecu I programmed the injector codes successfully but the tool i was using did not have any options for the immobiliser and thus i believe why it would not start.

    now i trying to see what i can do about getting a nanocom/hawkeye to it

    about the engine type, thanks for that info i will look into it.
    Reply With Quote Reply With Quote
  3. 22nd July 2014, 05:11 PM #13
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    btw i believe i have "EU2 10P" as the egr i pulled off it has no heat exchanger. but i will check the engine numbers next time i have a chance as its at the mechanic still while i find a tool.
    Reply With Quote Reply With Quote
  4. 24th July 2014, 08:43 AM #14
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    well it looks like it was the ecu, as i got home 40km last night when previously couldnt drive over 2k rpm

    big thanks to a couple of fellow forum members and the nanocom map thread

    "Learn Security Code" was what was needed in the Td5 Engine section .
    Reply With Quote Reply With Quote
  5. 24th July 2014, 02:07 PM #15
    haydent's Avatar
    haydent
    haydent is offline Wizard Supporter
    Join Date
    Jul 2009
    Location
    Mid North Coast, NSW
    Posts
    1,093
    Total Downloaded
    51.4 KB
    went to start car this morning after leaving it on charge over night. wont start... put old ecu in , starts first go, put new ecu in wont start, enter eka code correctly (now known from nanocom) still wont start.... what the...
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« Td5 oil leak - turbo area | Pressurised air pipe popping off »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!