Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: ABS and Handbrake light on

  1. 16th January 2016, 10:56 PM #11
    steve_a
    steve_a is offline Master
    Join Date
    Dec 2008
    Location
    Yatala Vale, Adelaide, SA
    Posts
    340
    Total Downloaded
    0
    We read the fault with the nanocom and had the same pump failure code.
    So we pulled the relay and probed the actual socket. We found we had no voltage at first.

    We probed a bit, found a few funny things, but it came down to disconnecting the abs pump, when plugged back in we got all the expected voltages and we could also trigger the pump on nanocom.

    A test drive later and it *seemed* to be OK.

    We then did what you do with a nanocom and looked at every setting on all the systems out of curiosity.

    The BCU had a bunch of odd settings:
    - thought it was connected to a petrol
    - thought it didn't have HDC and TC (which was why no lights)

    We also put a new EKA in for good measure, I think Kris had one of the nasty ones with high numbers, at least one was 15....

    I've borrowed him an ABS Amigo to read and clear the faults if they come back in the next few weeks.

    So... as fixed as the D2 ABS ever is at the moment
    Reply With Quote Reply With Quote
  2. 21st January 2016, 09:42 AM #12
    coolkris95
    coolkris95 is offline Fossicker
    Join Date
    Apr 2015
    Location
    Greenwith SA
    Posts
    12
    Total Downloaded
    0
    So about 10 minutes ago while I was driving I got hdc, tc, abs and handbrake warning light on. image.jpg

    Don't know if this has anything to do with it or whether it's a coincidence but the warning lights only started after I changed all the pads.

    Suggestions please?
    Last edited by coolkris95; 21st January 2016 at 09:49 AM. Reason: Extra info
    Reply With Quote Reply With Quote
  3. 21st January 2016, 10:39 AM #13
    discorevy
    discorevy is offline ChatterBox Subscriber
    Join Date
    Nov 2014
    Location
    Nirvana near Albany W.A.
    Posts
    2,480
    Total Downloaded
    0
    Have you knocked abs line? , if not are the new pads squealing?, as this can also do it .
    Reply With Quote Reply With Quote
  4. 21st January 2016, 04:50 PM #14
    coolkris95
    coolkris95 is offline Fossicker
    Join Date
    Apr 2015
    Location
    Greenwith SA
    Posts
    12
    Total Downloaded
    0
    I may have knocked it as for the pads they are not squealing.
    Reply With Quote Reply With Quote
  5. 13th March 2017, 02:54 PM #15
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,246
    Total Downloaded
    0
    I had the Handbrake light and ABS brake light come on yesterday. I stopped the engine, started it up again the ABS light went out when I pushed the brake pedal.
    I connected the Nanocom, no faults in the SLABS. AS the Traction Control light does not come on with all the other liaghts at start up, I had a look at the BCU. The TCR was on no. I changed this to yes, and noe the TC light lioghts up.
    I'm wondering if the TC was not operating, if disabled in the BCU?

    Thanks
    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
  6. 13th March 2017, 04:06 PM #16
    sierrafery's Avatar
    sierrafery
    sierrafery is online now YarnMaster Silver Subscriber
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,783
    Total Downloaded
    0
    Those settings in the BCU - Instrument pack are only for the warning lights, no effect on the SLABS behaviour... i really dont understand the utility of that function to disable the warning light of a system which works
    Discovery Td5 (2000), manual, tuned
    Reply With Quote Reply With Quote
  7. 13th March 2017, 05:37 PM #17
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,246
    Total Downloaded
    0
    Quote Originally Posted by sierrafery View Post
    Those settings in the BCU - Instrument pack are only for the warning lights, no effect on the SLABS behaviour... i really dont understand the utility of that function to disable the warning light of a system which works
    Nor do I, seems really stupid.

    Thanks

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
  8. 13th March 2017, 08:44 PM #18
    Richo1
    Richo1 is offline Fossicker Subscriber
    Join Date
    Mar 2013
    Location
    Perth
    Posts
    56
    Total Downloaded
    0

    EKA Mode

    Hi, reading this thread how do you reprogarm a new shorter EKA code?

    Richo1
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« 2000 td5 disco negative boost pressure | Front windows won't open »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!