What happened to your Discovery 2 today?

Printable View

Show 40 post(s) from this thread on one page

3rd February 2019, 01:21 PM
RobMichelle

Quote:

Originally Posted by John_D2

The rear drivers side suspension was sitting quite low yesterday. After checking the SLS fuses and a few other things, I discovered this:

https://uploads.tapatalk-cdn.com/201...3610bb1426.jpg

Having trouble seeing what’s wrong, can anyone point it out for me?

Looks like the ride height valve is broken.
3rd February 2019, 02:29 PM
AK83

Quote:

Originally Posted by John_D2

....

Having trouble seeing what’s wrong, can anyone point it out for me?

I see some of the pavers aren't perfectly levelled! [biggrin]
3rd February 2019, 03:52 PM
67hardtop

And the underside of the landy is dirty too. Tut tut....
3rd February 2019, 03:59 PM
rangieman

Quote:

Originally Posted by AK83

I see some of the pavers aren't perfectly levelled! [biggrin]

Dear i throw it back at you and say these sorts of posts are not help full no i wont [tonguewink]:Rolling:
3rd February 2019, 10:29 PM
rar110

Quote:

Originally Posted by weeds

So wheel bearing were OK.......

Four nuts fell off than the two maiming snapped the studs before falling off.

Many years ago I forgot to tighten the wheel nuts on my 40 series cruiser....at least on the car I could feel something was wrong before the wheel went walk about.

I agree with your assessment weeds.

Years ago after I rebuilt the 110, and it was in at the mechanic for the last big push and roadworthy. A week or two after I picked it up, the rear wheel fell of just like your camper. I’m guessing the RW guy took the rear wheel off to look at the brakes and forgot to tighten up the wheel nuts.

Anyhow, none of the wheel studs broke. I took a wheel nut from each of the other wheels and refitted the wayward wheel with 3 wheel nuts for the trip Hm

Maybe look st upgrading the wheel studs.
3rd February 2019, 10:50 PM
AK83

Quote:

Originally Posted by rangieman

Dear i throw it back at you and say these sorts of posts are not help full no i wont [tonguewink]:Rolling:

[biggrin]

Could be tho .. in ways not immediately obvious!
Lets assume that someone was a stickler for perfectly level pavers ... and ....

[smilebigeye]
4th February 2019, 08:14 AM
trout1105

Quote:

Originally Posted by RobMichelle

Looks like the ride height valve is broken.

I have the coil spring conversion on my D2a so I should have these parts that are now redundant still on the truck.
I will have a squiz later on today and if they are not too much of a PITA to remove you are welcome to them[thumbsupbig]
4th February 2019, 08:45 AM
RobMichelle

Quote:

Originally Posted by trout1105

I have the coil spring conversion on my D2a so I should have these parts that are now redundant still on the truck.
I will have a squiz later on today and if they are not too much of a PITA to remove you are welcome to them[thumbsupbig]

I reckon john_D2 might appreciate the offer. [emoji2]
4th February 2019, 08:55 AM
Pedro_The_Swift

Does John like broken bits? [bighmmm]
4th February 2019, 02:53 PM
John_D4

Quote:

Originally Posted by trout1105

I have the coil spring conversion on my D2a so I should have these parts that are now redundant still on the truck.
I will have a squiz later on today and if they are not too much of a PITA to remove you are welcome to them[thumbsupbig]

Thanks anyway but I bought this car with a coil conversion kit & I’ve put the SLS back in. Kind offer tho

Show 40 post(s) from this thread on one page