What happened to your Discovery 2 today?

Quote:

---

Originally Posted by AK83

I see some of the pavers aren't perfectly levelled! [biggrin]

---

Good to see you looked at the pic hard! I’m pretty sure that’s the only uneven paver!

Why just break bits singularly when u can break them in pairs! The top hose rubbed on the a/c compressor causing a leak. Obviously the new intercooler moved the radiator a smidge backwards? Either way, a new silicon hose is on the way. Unfortunately I couldn’t get blue hoses to match the intercooler so I’m stuck with black again [emoji3525]

Quote:

---

Originally Posted by John_D2

Thanks anyway but I bought this car with a coil conversion kit & I’ve put the SLS back in. Kind offer tho

---

I thought Trout meant he had his old SLS parts for you. Cheers

Quote:

---

Originally Posted by ozscott

I thought Trout meant he had his old SLS parts for you. Cheers

---

Yes that's what I thought he offered as well, seems that one in pic is broken

Quote:

---

Originally Posted by trout1105

I have the coil spring conversion on my D2a so I should have these parts that are now redundant still on the truck.
I will have a squiz later on today and if they are not too much of a PITA to remove you are welcome to them[thumbsupbig]

---

Sorry Trout I misread your message. I thought you were offering me your old coil conversion bits. My bad. Unfortunately because of this I’ve already ordered the parts [emoji47].

Quote:

---

Originally Posted by John_D2

Sorry Trout I misread your message. I thought you were offering me your old coil conversion bits. My bad. Unfortunately because of this I’ve already ordered the parts [emoji47].

---

All is Good Mate[thumbsupbig]

Repaired the RH blinker in the bull bar, the relay had melted a spade off.
Popped the poor little relay open, OMG! (Can't seem to post photos from tapatalk?) Corrosion doesn't adequately describe the state of the relay.

Installed a new washer bottle along with headlight washers.
Why? [emoji848]
Because I just wanted them. [emoji12]

The original grill

Attachment 148221
After cutting out the bits I didn't need
Attachment 148220

Mesh cut to size
Attachment 148222

Lots of Sikaflex and cable ties to hold it all together
Attachment 148225

Finished product, Now I have to wait for the paint to dry and fit it.
Attachment 148226

Quote:

---

Originally Posted by trout1105

The original grill

Attachment 148221
After cutting out the bits I didn't need
Attachment 148220

Mesh cut to size
Attachment 148222

Lots of Sikaflex and cable ties to hold it all together
Attachment 148225

Finished product, Now I have to wait for the paint to dry and fit it.
Attachment 148226

---

Well what does it look like installed?!

Quote:

---

Originally Posted by DiscoDiscoMan

Well what does it look like installed?!

---

Ill let you know when the paint dry's[biggrin][thumbsupbig]