Thread: Fuel Pressure Regulator

No gaskets, regulator only.
Part numbers are
MSX100080 Gasket Early type
MSX000010 Gasket Late type
ERR6761 Oring
MAE100010 Strainer if needed.

OK thanks, on an unrelated note, my disco went onto an hoist and now the SLS is deflated and wont pump up

I ran into troubles when i fitted a kit to mine, the gasket supplied wouldn't seal. Apparently there is an early regulator and a late regulator which look the same but have different gaskets. i was lucky and the old gasket was reused, and sealed, they are a once use only gasket.

Originally Posted by Yakuza

OK thanks, on an unrelated note, my disco went onto an hoist and now the SLS is deflated and wont pump up

Were they careful about where they lifted it? The compressor is on the chassis rail below the front passenger door, in a plastic case.

Well I think it has something to do with the height sensors

As its has an 40mm lift in the back but not extended height sensors

Originally Posted by Roverlord off road spares

Those regulator kits can be hit and miss, some times they work some times they don't

I have fitted several with no problems whatsoever

Sent from my SM-G900I using AULRO mobile app

Originally Posted by Outback 1

I have fitted several with no problems whatsoever

Sent from my SM-G900I using AULRO mobile app

As I said they can be hit or miss, you are part of the lucky hit fraternity.