Reply With QuoteI don't think it'd be a good idea to have metal on the dash in case of a crash.....
ForumSage
SubscriberHi all. Anyone got a piece of black anodised alloy plate on their dash for mounting cameras, phone cradles etc? How affixed? Pics?
Cheers
Wizard
I don't think it'd be a good idea to have metal on the dash in case of a crash.....
Wizard
SubscriberCouldn't be much worse than a gps, iPod and phone all stuck on the windscreenOriginally Posted by Railey
-----
You have the right to remain silent. Anything you say will be misquoted, then used against you.
-----
1999 Disco TD5 ("Bluey")
1996 Disco 300 TDi ("Slo-Mo")
1995 P38A 4.6 HSE ("The Limo")
1966 No 5 Trailer (ARN 173 075) soon to be camper
-----
AT RESTSeen a few discos with an array of toys, wonder how they can keep theirs eyes on the road when monitoring all the gizmos and watching and playing with their nanocomsCouldn't be much worse than a gps, iPod and phone all stuck on the windscreen
ForumSage
SubscriberIf the plate/sheet is sikaflexed down and say 3mm thick and then the devices are screwed down into it they might be less likely to fly off in a (particularly rear end) collision. If a plate on the centre of the dash causes intrusion damage you have a lot more to be worried about... Cheers
ForumSage
SubscriberOff road maps, SJCam etc all good. Cheers
Master
I made up a small phone mount using C channel and screwed it to the dash where one of the rubber recess mats sit. Not holding much load though.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks