Results 1 to 5 of 5

Thread: VIbration, driveline manual TD5

  1. 21st July 2019, 04:52 PM #1
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,247
    Total Downloaded
    0

    VIbration, driveline manual TD5

    I have a vibration, that starts at about 60kph, up to 80kph. The more the throttle, the more the vibration. The vibartion stops on throttle off. This happens in 4th and 5th, different revs, so I think not the engine. I think drive train. The front prop shaft is fine. I need to check the rear prop shaft, maybe the donut got Homered! . Any ideas about what it could be? TC lay shaft gearbox output bearing some thing easyish to fix



    Thanks in advance.

    Julian
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
  2. 21st July 2019, 06:31 PM #2
    Kaaaiju
    Kaaaiju is offline Master Subscriber
    Join Date
    Jul 2017
    Location
    Victoria
    Posts
    834
    Total Downloaded
    0
    I had the same, was the rear donut
    Reply With Quote Reply With Quote
  3. 21st July 2019, 07:05 PM #3
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,247
    Total Downloaded
    0
    Quote Originally Posted by Kaaaiju View Post
    I had the same, was the rear donut
    Thanks, I'll check tomorrow.

    The rear donut looks to be in really good condition. No movement at all. It occurred to me later that maybe raise a wheel, put the TC in neutral and see if there is any movement for both prop shafts.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
  4. 30th July 2019, 08:28 AM #4
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    and the winner was?

    TD5's seem prone to funny vibes...
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  5. 30th July 2019, 10:32 AM #5
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,247
    Total Downloaded
    0
    The jury is still out. Maybe this weekend after I change the leaking gaskets, etc.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
« Poor pickup. Discovery Td5 | Seventh year of D2 Ownership »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!