Thread: Wires looking for a home near gearbox.

Well duhh...
I have the electrical library and I checked that.

The two pin is C0167 for reverse light switch that I found immediately after reading a bit


The two seperate are the C0306 and C0307 for diff lock unit to the sensor on top I was thinking of.

Also two seperate wires with female spades on.
Black and black/green....The two seperate are the C0306 and C0307 for diff lock unit to the sensor on top

If the wire is BG the plug is C0686 not C0306 which is BU wire, quite common for that transfer box temp wiring to be there unused, if you earth it the transmission temp warning lamp should come on

Originally Posted by sierrafery

If the wire is BG the plug is C0686 not C0306 which is BU wire, quite common for that transfer box temp wiring to be there unused, if you earth it the transmission temp warning lamp should come on

Thank You. You are absolutely correct.

The wire definately does not have blue on it, but green.
I think I had written down the C0686 when searching this.

Are those sensors/switches just one wired, so the second contact really is empty oir am I still missing something I could not find anywhere..

Like the oilpressuresensor (or was it oil temp) in the oil cooler?
Atleast that sensor only has one contact but the wire and connector has both. But the other wire just cuts off somewhere inside the conduit and I could not find the other end for it.