Show us your D2, PICS only.

This is my ride, my pride and joy.
2000 TD5 auto, not many mods but I'm happy

Standard suspension set up with Bilstein shocks (not lifted)
TJM 15 Alloy bull bar
2 x Cibie Oscars driving lights
Safari Snorkel
Magellan GPS
iCom 4400 UHF - remote unit with mic in handset
GME AE4705 Antenna (4.5db)
Snatch strap, rated shackles,
Impact wrench for wheel nuts
Air compressor
Jumper cables
Rear recovery slide in block and rated shackle on rear tow bar
And whole lot of stuff in a red tool box and in the rear holders on each side of rear tray and also in rear door pockets
Tyres - Michelin LTX A/T2 245/75/16 (done about 500kms in wet/damp weather on rock, shale, clay, mud and quite impressed with grip, very quiet on highway and good in the wet too)

Soon to get 3/4 roof cage and CDL manual activator kit and decent front recovery ponts.

Cheers,
Jack

If its able to get dirty it's good enough! Thanks.

Alrighty here's mine...

She's a '99 Td5 Auto with nothing but the bare essentials...uhhh no options that is.
I'm the third owner, it was originally a demonstrator at Purnell Motors in Sydney.

Only modifications thus far are a set of Bridgestone Dueller A/Ts in LT245/70R16.

There's a pretty good list of things that need to be replaced and repaired, but I'm still happy with my Disco.

https://www.aulro.com/afvb/images/im...10/09/1078.jpg

https://www.aulro.com/afvb/images/im...10/09/1079.jpg

SE7 V8 ACE and SLS (now has springs in back) 6 stacker, cloth trim, factory front bar.

https://www.aulro.com/afvb/images/im...10/09/1061.jpg

https://www.aulro.com/afvb/images/im...10/09/1062.jpg

This is my first 4WD and hoping to keep it for a while unless I win Lotto and get a 90 or D4.

Quote:

---

Originally Posted by JBM770

SE7 V8 ACE and SLS (now has springs in back) 6 stacker, cloth trim, factory front bar. This is my first 4WD and hoping to keep it for a while unless I win Lotto and get a 90 or D4.

---

Nice, and congrats on your first 4WD. I note above your side steps that the black plastic trim that runs along the sill is missing. Did you remove them?

Thats how I bought it, I thought that they were taken off to fit the step.

Quote:

---

Originally Posted by JBM770

Thats how I bought it, I thought that they were taken off to fit the step.

---

The side steps look to be original LR part STC 50031 and according to RAVE, the side trim can be in place with the side steps so if you wanted to retro fit you could. Not that it matters; they're a nicer step than the ones I had (STC50030).

Peter

but do they have Palm trees and a Disco on them???:cool::cool::cool:

my 01 discovery 2 td5

before the 2' lift and 265/7516 bfg a/t

https://www.aulro.com/afvb/images/im...010/09/575.jpg


after

https://www.aulro.com/afvb/images/im...010/09/576.jpg


https://www.aulro.com/afvb/images/im...010/09/577.jpg

Couple of pictures of my D2.