Thread: ABS AMIGO fault clearing device - and recorder...

Here is another thread but doesnt say much - one fella got it and it did what it said on the box

http://www.aulro.com/afvb/electronic...go-device.html

I dont have a TDR nor air suspension, so it seems to me that this and the scanguage would be the only diagnostic and reset tools I would need into the future?

Cheers

I have one for the d2 v8,had the 3 amigo's.the amigo reader said the front right sensor was faulty,i then bought a msv2 from harde range it confirmed that the sensor was faulty good to know that both readers said the same thing,replaced sensor cleared faults all good[touch wood]

Storey Wilson of RSW Solutions produced software for resetting air suspension fault codes on RR Classic and p38 that is available as a free download. I have downloaded his EASunlock software and it works a treat- it enabled me to reinstall and reactivate EAS on my 94 RR that had been removed by the previous owner.
I would think that you can be confident in his other products, although I have no direct knowledge of this particular one.

Since you have the scangauge already, it's probably worth picking up if you can get it under $200.

Otherwise, I'd put in a bit extra and grab a nanocom (etc.). That way you not only read and clear the error logs, but you can physically test the system components too.

Have one, works well.Always done its job.

Thanks people. Really good to hear they work well. They look like they would do the trick.

What would Nanocom do that ABS Amigo + Scanguage II wouldnt do for a V8 (ie not TD5)...

Cheers

Originally Posted by ozscott

Thanks people. Really good to hear they work well. They look like they would do the trick.

What would Nanocom do that ABS Amigo + Scanguage II wouldnt do for a V8 (ie not TD5)...

Cheers

Nanocom won't work at all on a V8................ sorry, my bad.

Hawkeye would be one alternative

Should allow you to test wheel cyliders, sensors, shuttle valves, power bleed the system.......(looking for the hawkeye PDF I downloaded)

Wishful thinking, but.....

-Does anyone know it this works on a Classic ? - Or what else is available to do the same job on my ABS/3 Amigoes lights.

Thanks