Thread: Which Staun Deflators?

I find the stauns great, except as said can be knocked out of setting if not tightened correctly.
You will want the 6-33psi as they are for letting tyres down only and you are going to be dropping the pressures to around 16-20psi for sand most times.

I use a set of these ....

QuickAir Deflator

The QuickAIR Deflator is a simple tool that allows you to air down quickly and easily. Using the Deflator, you can air down as many as four tires at the same time. Simply screw one of the pieces onto your valve stem and air will be released. The Deflator will also allow you to check the tire pressure during deflation without removing the tool. Once the desired pressure is reached, remove the deflator and put it back on the handy keychain. Made of machined aluminium, the Deflator has no moving parts to fail.

(I got them from PNL at Wandin last year)

I also have a set of the staun type deflators in the glovebox which I've NEVER actually used ... When setting them up (trying to set them) I found such an erratic variation in pressures when they cut off, that I decided it was a pointless exercise to go any further with them. The variation was about +/- 4psi on 4 wheels when the same deflator was used to deflate all 4 tyres.

I'm very happy with the deflators shown above, my knees and back are fine with bending down to check the pressures as they drop down close to where I want them.

Stevo.