Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Removing "Xtreme" stickers

  1. #1
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0

    Removing "Xtreme" stickers

    A quick search here on removing stickers got me some info about using a hairdryer to make the glue soft, but then a subsequent post said it would cause the paint to crack (Can it be worse than extreme sunlight??).

    Anyone had success with chemicals to get them off?

    I am thinking paint thinners because I have a 4L tin of this, but perhaps might not be so good for the paintwork...

    Something in the back on my brain is saying "PrepSol", what ever that may be

    Thanks
    David

  2. #2
    Join Date
    May 2007
    Location
    NSW, Australia
    Posts
    4,656
    Total Downloaded
    0
    prep-sol is a pre paint cleaning solvent.

    It would probably remove any remaining adhesive, and will be fine on your paint.

    Wether it would remove the stickers or not I am unsure...
    [B][I]Andrew[/I][/B]

    [COLOR="YellowGreen"][U]1958 Series II SWB - "Gus"[/U][/COLOR]
    [COLOR="DarkGreen"][U]1965 Series IIA Ambulance 113-896 - "Ambrose"[/U][/COLOR]
    [COLOR="#DAA520"][U]1981 Mercedes 300D[/U][/COLOR]
    [U]1995 Defender 110[/U]
    [SIGPIC][/SIGPIC]

  3. #3
    Join Date
    Dec 2007
    Location
    South East Tasmania
    Posts
    10,705
    Total Downloaded
    0
    I used the hairdryer on the Defe and all is OK

  4. #4
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0
    Hmmm: PrepSol + Hairdryer. They might be gone in a flash!

  5. #5
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Hairdryer is the go but be aware that the paint under the sticker might not match the surrounding paint.
    The rest of the car has been in the sun for a few years.
    Scott

  6. #6
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0
    That's what the dealer said. They were supposed to remove the sticker before I picked it up, but the workshop manager said they didn't want to be responsible for any damage/etc pulling it off.

    A good buff with some cut-and-polish should blend it in though.

    Be a lot less noticable than the Xtreme sticker anyway.

  7. #7
    Join Date
    Dec 2008
    Location
    Blue Mountains
    Posts
    153
    Total Downloaded
    0
    I just pulled my stickers off without any dramas. No hair dryer or chemicals no marks.


    Cheers

  8. #8
    Join Date
    May 2009
    Location
    Perth/Adelaide Hills
    Posts
    71
    Total Downloaded
    0
    When I first got mine, I was working at a winery in the hills. One of the things we use to clean and sanitize stuff is a diesel- Karcher water blaster, with a temperature control.

    I set the temperature at about 120 deg. and the pressure slightly below full. I blasted them for a while with very hot water/steam. They peeled right off leaving only the tiniest residue. I sorted that out with some stuff that I had distilled but was not up to scratch. You could use metho if you don't have a still!

    This worked a treat and there was nothing remaining. The stickers peeled off in one piece. I would post pics but the car was destroyed...

  9. #9
    VladTepes's Avatar
    VladTepes is offline Major Part of the Heart and Soul of AULRO Subscriber
    Join Date
    Feb 2004
    Location
    Bracken Ridge, Qld
    Posts
    16,055
    Total Downloaded
    0
    belt sander
    It's not broken. It's "Carbon Neutral".


    gone


    1993 Defender 110 ute "Doris"
    1994 Range Rover Vogue LSE "The Luxo-Barge"
    1994 Defender 130 HCPU "Rolly"
    1996 Discovery 1

    current

    1995 Defender 130 HCPU and Suzuki GSX1400


  10. #10
    Join Date
    Jan 1970
    Location
    CROMER, NSW
    Posts
    2,048
    Total Downloaded
    0
    yep, use a hair dryer or a heat gun. it softens the decal and the glue, allowing you to peel it off easier.
    you can also use orange oil to remove the glue, it dissolves the glue and then washes off.
    get some AutoGlym paint restorer (which is basically a fine rubbing compound) and give the whole panel a go over, then follow that with some Super Resin Polish by the same mob and it will look as good as new.
    after you've done the one panel, you will probably want to do the rest.
    LAND ROVER;
    HELPING PUT OIL BACK IN THE GROUND FOR 70 YEARS
    CARS DON'T GET ANY "GREENER" THAT.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!