Thread: Rang Jacmac today

Originally Posted by GuyG

Then you deal with Barry from Hi Tough and/or Warren from MR Automotive

Which one is manufacturing the diff locks ?


Martyn

Originally Posted by Bushie

Which one is manufacturing the diff locks ?


Martyn

I don't think anyone is?

I throught it was just axles and flanges?


this from the MR web site

Maxi - Drive Products.

M.R. Automotive are now manufacturing and distributing selected Maxi-Drive products along with our own specialised Landrover accessories.
Products include:

• Ball Joints
• T Pieces
• Thrust Washer Sets
• Track Rods
• Drag Links
• Idler Pulleys
• Brass Bungs
• CV Antiburst Rings
• ABS Rings
• Brass Window Rollers
• Brass Bleed Screws
• 300 TDi Timing Cover Bearings
• Extended A-Frame Ball Joints

Hi Tough has taken over the axles and flanges and MR has the rights to manufacture the lockers and I believe they will be starting to manufacture some lockers in the future but you will need to confirm with them which will be first

Originally Posted by Bushie

Which one is manufacturing the diff locks ?


Martyn

Neither atm but MR should be down the track

Unlike ARB where you are dealing with some pimple faced doff doff salesman

Thats's a pretty generalized comment. Do you know many people that work at ARB?.

Originally Posted by Wortho

Thats's a pretty generalized comment. Do you know many people that work at ARB?.

I've found them to be pretty good. Mannells, Traction 4 etc.

I like to think that i'm not a total lost cause and that i may know a little bit about what i'm talking about, and i havn't had pimples for quite a while now.

Quote:
Originally Posted by rangieman
At least with jmac lockers if you have any problems you will deal with the man that makes them......................

BUT; as with Maxidrive, what happens when the man stops making them ??

Martyn
__________________
Quote:
Originally Posted by Bushie
BUT; as with Maxidrive, what happens when the man stops making them ??

Martyn

Then you deal with Barry from Hi Tough and/or Warren from MR Automotive

I think what Guy G is getting at is that if Jacmac - Jeff- decides to retire as per Maxi, there will be someone to take on the products & continue to manufacture & sell them, as there is always a demand for diff locks.