Page 1 of 7 123 ... LastLast
Results 1 to 10 of 63

Thread: Asbestos

  1. #1
    Join Date
    Sep 2008
    Location
    Sydney
    Posts
    420
    Total Downloaded
    0

    MoveLater2 Asbestos

    Just a quick question, does anybody know if there is asbestos in the LR series 3 diff gasket?
    Last edited by V8Ian; 4th July 2021 at 09:10 AM.

  2. #2
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    No answers yet.....

    Asbestos is usually used in gaskets where heat is involved so I would say not in the car of an axle/diff gasket.

    All the cars I've worked on from the 40s to the current times (that's the years of the cars - not me) don't use asbestos in gaskets in that area.
    Scott

  3. #3
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    I will go along with Scouse

    If you really wanna know,you could always get it tested

  4. #4
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    no, asbestos was only used in engine gaskets mainly the exhaust and the carby spacer gaskets.

    it was also used in brake linings and clutchs as well as the thermal insulation
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  5. #5
    Join Date
    Sep 2008
    Location
    Sydney
    Posts
    420
    Total Downloaded
    0

    Re: Asbestos

    Thanks for the input guys - I get a little paranoid :s

    I didn't think the diff gasket would require asbestos - if I'm doing some work with asbestos gaskets (engine, exhaust) though, would an ordinary face mask be ok? I know it's not dangerous unless broken, but I'd like to take some precautions just on case...

  6. #6
    Join Date
    May 2009
    Location
    wimmera
    Posts
    503
    Total Downloaded
    0
    a mask is better then nothing.
    but if you have a sponge and water handy just wet it, when its wet the fiber's dont go airbourne.

  7. #7
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    Water spray bottle is the go to wet it down with,also many masks have "do not use for asbestos" written on them.

    You will have to hunt around for the correct one.

  8. #8
    Join Date
    Dec 2007
    Location
    ChCh New Zealand
    Posts
    547
    Total Downloaded
    0
    I did a job recently where there were 'professional' asbestos removalists. I was told by them that the hype over asbestos was great for their business. The consensus of the group was if general common sense was carried out, they'd be out of work. The only real concern for them asbestos wise was when asbestos had been used to lag plumbing pipes.

  9. #9
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Quote Originally Posted by Siska View Post
    I did a job recently where there were 'professional' asbestos removalists. I was told by them that the hype over asbestos was great for their business. The consensus of the group was if general common sense was carried out, they'd be out of work. The only real concern for them asbestos wise was when asbestos had been used to lag plumbing pipes.
    Yep, Asbestos lagging, my old man tells me about how they used to have asbestos ball fights, like snow balls, with the lagging when he was an apprentice, my uncle only just recently died from mesothelioma

    He was also telling me, when he first heard of it in the SEC they showed a "safety video" in about 1970-71, he said it was an american film, and being into cars, had a few questions as to why the cars in the film were from the mid 50's

  10. #10
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    Oh, I doubt it would be, as you really can tell an asbestos gasket in comparison to a composite, but if you want piece of mind, the best method is to spray it down, with CRC, penetrine or the like on removal, will prevent airborne particles, then double bag it, ideally you'd put it in an asbestos dump, but like most of it, it'll end up in landfill

Page 1 of 7 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!