What's currently in the ceiling space...and what are they offering to lay over the top?
Question for the masses, if laying home insulation is there any benefit/reasoning to laying new insulation over the top of old less efficient insulation already in place.
We have been offered by a licenesed mob to come and lay new insulation without removing the old, all covered by the current grants.
What are peoples thoughts, remove old or just lay new over the top??
Thanks
Yorkie![]()
What's currently in the ceiling space...and what are they offering to lay over the top?
rockwool over rockwool should be ok ,so long as it is laid in-between the joist, dont use foil, ever
I understand that the grant only applies to houses without insulation - therefore you would have to get the old stuff removed first before the new stuff goes in - and if the authorities hear about it - no rebate.
Garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
Not quite...
If it is <0.5 R then it is basically doing nothing. I suspect they are just trying to save time/money, and possibly 0.5R on the stuff they install???
Householder eligibility
To be eligible to obtain the assistance the Householder must:
...
* be arranging the installation of new Ceiling Insulation, not replacing existing Ceiling Insulation above what is deemed as having Negligible Effectiveness (see ‘Definitions’); and
Negligible Effectiveness - Ceiling Insulation is deemed as having negligible effectiveness if it is at or below 0.5 R-Value. The Installer makes a declaration in the Work Order Form that the R-value of existing insulation is 0.5 or less.
What type do you have and what type are they installing?
just wooly stuff in there now, probably 15yo at least.
garry - reading the requirements it allows for "be arranging the installation of new Ceiling Insulation, not replacing existing ceiling insulation above what is deemed as having Negligible Effectiveness;"
would suggest current stuff is having negligible effect at the moment.
just trying to avoid having to remove old stuff first if it is not going to effect the insulation properties of the new stuff on top.
cheers
liam
As a builder, I agree, the thicker up to a point the better.
watch out for un-licensed installers, 12v halogen fittings and their associated transformers especially the older ones need room as the heat up, a lot.
Insulation has to be placed carefully and consistantly so there are very little gaps.
Do not just squash it in as that will reduce its effectiveness greatly.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks