Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Home Insulation

  1. #1
    Join Date
    Nov 2007
    Location
    On the road.
    Posts
    1,946
    Total Downloaded
    0

    Home Insulation

    Question for the masses, if laying home insulation is there any benefit/reasoning to laying new insulation over the top of old less efficient insulation already in place.
    We have been offered by a licenesed mob to come and lay new insulation without removing the old, all covered by the current grants.
    What are peoples thoughts, remove old or just lay new over the top??

    Thanks
    Yorkie

  2. #2
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    3,234
    Total Downloaded
    0
    What's currently in the ceiling space...and what are they offering to lay over the top?

  3. #3
    richard4u2 Guest
    rockwool over rockwool should be ok ,so long as it is laid in-between the joist, dont use foil, ever

  4. #4
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    I understand that the grant only applies to houses without insulation - therefore you would have to get the old stuff removed first before the new stuff goes in - and if the authorities hear about it - no rebate.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  5. #5
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    I understand that the grant only applies to houses without insulation - therefore you would have to get the old stuff removed first before the new stuff goes in - and if the authorities hear about it - no rebate.

    Garry
    Not quite...


    Householder eligibility

    To be eligible to obtain the assistance the Householder must:
    ...
    * be arranging the installation of new Ceiling Insulation, not replacing existing Ceiling Insulation above what is deemed as having Negligible Effectiveness (see ‘Definitions’); and


    Negligible Effectiveness - Ceiling Insulation is deemed as having negligible effectiveness if it is at or below 0.5 R-Value. The Installer makes a declaration in the Work Order Form that the R-value of existing insulation is 0.5 or less.
    If it is <0.5 R then it is basically doing nothing. I suspect they are just trying to save time/money, and possibly 0.5R on the stuff they install???

    What type do you have and what type are they installing?

  6. #6
    Join Date
    Nov 2007
    Location
    On the road.
    Posts
    1,946
    Total Downloaded
    0
    just wooly stuff in there now, probably 15yo at least.

    garry - reading the requirements it allows for "be arranging the installation of new Ceiling Insulation, not replacing existing ceiling insulation above what is deemed as having Negligible Effectiveness;"

    would suggest current stuff is having negligible effect at the moment.

    just trying to avoid having to remove old stuff first if it is not going to effect the insulation properties of the new stuff on top.

    cheers
    liam

  7. #7
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Quote Originally Posted by Yorkie View Post
    just wooly stuff in there now, probably 15yo at least.

    garry - reading the requirements it allows for "be arranging the installation of new Ceiling Insulation, not replacing existing ceiling insulation above what is deemed as having Negligible Effectiveness;"

    would suggest current stuff is having negligible effect at the moment.

    just trying to avoid having to remove old stuff first if it is not going to effect the insulation properties of the new stuff on top.

    cheers
    liam
    Insulation R values are additive, definitely leave the old stuff in if there's room for the new, can only end up with better insulation value.

  8. #8
    Join Date
    Apr 2007
    Location
    Prospect SA
    Posts
    2,131
    Total Downloaded
    0
    As a builder, I agree, the thicker up to a point the better.
    watch out for un-licensed installers, 12v halogen fittings and their associated transformers especially the older ones need room as the heat up, a lot.
    Insulation has to be placed carefully and consistantly so there are very little gaps.

    Do not just squash it in as that will reduce its effectiveness greatly.

  9. #9
    Join Date
    Jan 1970
    Location
    Brissy! No flannos here!
    Posts
    8,814
    Total Downloaded
    0
    Quote Originally Posted by richard4u2 View Post
    rockwool over rockwool should be ok ,so long as it is laid in-between the joist, dont use foil, ever
    Why? (Apart from the dodgy installs in the news)

    Ralph

  10. #10
    clean32 is offline AULRO Holiday Reward Points Winner!
    Join Date
    Mar 2008
    Location
    SA, Newton
    Posts
    2,104
    Total Downloaded
    0
    Quote Originally Posted by Ralph1Malph View Post
    Why? (Apart from the dodgy installs in the news)

    Ralph
    Well as seen on TV, electricity. But I would assume moisture, either as humidity or roof leaks. Most roofs leak more so when there is wind

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!