Ha ha ha
Off cause your right,
I just couldn't see it thru my bi-xenon, self leveling,adaptive,power washing, sunglass lens,
you have sure put the electric park brake on my thoughts now,
but I should have seen that coming in my auto adjusting reverse mirrors
what a dipstick I must be to of not realised how functional all this is
Cheers Ken
Hi all,
I have no doubt there is some BS being spoken by the dealer here, however I have to give the harmonics thing some consideration....
I have just had the ARB bar fitted to my D4 (no roof racks, same tyres as before) and the first thing I noticed when i drove it after the bar fitment (it's my daily driver so I know all the noises...) was that it sounded like I'd dropped the mufflers or it had a hole in the exhaust when under load - it now produces a much nicer induction sound like after fitting pod filters...!
The only change though was the bar so it led me to believe that it had changed the air intake path to the engine bay and has therefore created some different harmonic noises.....soooo I don't think LR are necessarily BS-ing on this one... Mind you I like the new increased noise...even the wife questioned whether I had been spending money on something other that the bar![]()
If you want to experience induction roar - add a LR RAI to your D43.0L...(or 2.7 I assume?)..OMG....I had a nice quiet D4, now with the window down and right foot down I get an orchestra 1 foot from right ear.....anyone with a RAI will know what I mean!![]()
OzAd4x4, I have an ARB bar on a D4 and there has been NO change to noise levels. I fitted the bar and cut the rubber surround behind the grill to fit with the new bar. I have heard of some ARB fitters not replacing the rubber shroud and if this is the case with your bar it may be the cause of the noise. However, I had an ARB bar on my previous D3 and the shroud was removed by ARB to fit the bar and I did not notice any increase in noise. Would suggest you have a good look at what they have done fitting the bar.
Cheers
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Last edited by ADMIRAL; 26th May 2011 at 08:54 PM. Reason: punctuation
D4 2.7litre
As I didn't fit the bar myself this time (got a good deal so saved myself some work) I'm not sure what rubber piece you are referring to...any pics as I do have all the bits that were removed in the garage....thought someone might need a replacement on here at some stage.
The only thing I can think of is that the airflow into the engine bay is following a different path now as the openings on the ARB are different to the stock bumper..although I also don't have the rubber inserts fitted between the headlights and bar which ARB have evidently stopped supplying? Maybe this could be causing the noise?
Either way I'm not bothered as to me it sounds much nicer
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks