Page 6 of 6 FirstFirst ... 456
Results 51 to 55 of 55

Thread: ENGINE SYSTEMS FAULT

  1. 10th August 2018, 04:39 PM #51
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    No sign of the park brake being stuck on? You'd smell the burning before getting too far so unlikely.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  2. 10th August 2018, 06:34 PM #52
    BobD
    BobD is offline Wizard Supporter
    Join Date
    Dec 2011
    Location
    Forrestfield WA
    Posts
    1,306
    Total Downloaded
    0
    I wonder if it might be related to the transmission in some way at that mileage, especially if it hasn't had an oil change for a long time. I don't know what it would be but just a thought. I assume that the car wasn't revving abnormally, which would be a bit of a give away.
    Bob

    2010 D4 3.0TDV6 SE, ediff, LLAMS, 5 x GOE wheels, LT285/60R18 BFG K02's, GOE Compressor Guard, LR Tank, Mitch Hitch, ECB Bull Bar, Kaymar Rear Bar, Traxide, Safari Snorkel.
    2019 Discovery 5 SD6 SE, 20 inch wheels, 275/55R20 Nitto Grappler G2 tyres
    Reply With Quote Reply With Quote
  3. 10th August 2018, 10:09 PM #53
    DiscoJeffster
    DiscoJeffster is offline TopicToaster Subscriber
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,335
    Total Downloaded
    0
    Quote Originally Posted by JonW View Post
    Sorry to drag this one out of the grave but my 2010 3.0 D4 has done the same thing although it has 232k kms on it. No restricted performance warning though and no code/s. Just a reduction in power, no smoke, no hesitation, no rough running. Just gutless. Hope a software fix sorts it out.
    In regards to your ‘no codes’ comment. Did you use an IIDTOOL? If so, you need to go into options and select ‘pending’ errors. P006a etc all come in as pending errors and by default the IID doesn’t show them. Catches you out as a newby to the tool
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)
    Reply With Quote Reply With Quote
  4. 12th August 2018, 08:31 AM #54
    JonW
    JonW is offline Fossicker
    Join Date
    Apr 2014
    Location
    Central Coast
    Posts
    46
    Total Downloaded
    0
    BobD- ZF6hp26 is serviced every 20k, no due for another 10k yet. No issue with the trans- shifts were fine, drove as normal.

    Disco Jeffster- I have used a canbus data scan tool which picked up the previous error with the manifolds, but no faults either stored or pending.

    Monday is the day, so I will update when I know.
    Reply With Quote Reply With Quote
  5. 13th August 2018, 01:32 PM #55
    JonW
    JonW is offline Fossicker
    Join Date
    Apr 2014
    Location
    Central Coast
    Posts
    46
    Total Downloaded
    0

    Engine Systems Fault update

    Had a call from the dealer, seems the fuel/power control ECU needed a refresh and all is good again.

    Except that they also diagnosed the viscous coupling in the cooling fan as pumping out some faults. Anyone else had this issue? Cooling fan and coupling is only a couple of hours work since the fan shroud is now two pieces after doing the cam belt.
    Reply With Quote Reply With Quote
Page 6 of 6 FirstFirst ... 456
« Service Recording -- Be aware!!! | D4 low battery. Please start engine. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!