Results 1 to 4 of 4

Thread: Wheel speed sensor and height sensor

  1. 8th April 2015, 06:27 PM #1
    Ean Austral Guest

    Wheel speed sensor and height sensor

    Gday All,


    After reading the essential spares sticky I see wheel speed sensors and height sensors are recommended spares to carry. I looked at these items and see they are listed as LH and RH items, so that means they are wheel specific not just front and rear.


    So have I mis-read this info or are people carrying 4 of each as spares? I guess you could just take the 50/50 gamble and hope if they do fail you are carrying the right spare.


    Teach me oh wise one's.


    Cheers Ean
    Reply With Quote Reply With Quote
  2. 8th April 2015, 06:38 PM #2
    Ferret's Avatar
    Ferret
    Ferret is offline YarnMaster Subscriber
    Join Date
    Feb 2007
    Location
    Perth
    Posts
    3,916
    Total Downloaded
    0
    Interested in the answer to this also.
    2024 RRS on the road
    2011 D4 3.0 in the drive way
    1999 D2 V8, in heaven
    1984 RRC, in hell
    Reply With Quote Reply With Quote
  3. 9th April 2015, 01:19 PM #3
    LRD414's Avatar
    LRD414
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0

    Not handed

    I've looked into this for mine (D4 MY14). I asked specifically about left/right and have been told by the dealer parts specialist that the sensors are the same for left and right. My examples, which I have already purchased:

    LR013783 will fit RHF & LHF (wheel speed)
    SSB500102 will fit RHR & LHR (wheel speed)
    LR023648 will fit rear both sides (suspension height)

    I didn't ask about front suspension height LR023646 but assume same thing (good for both sides). I also haven't actually looked at the existing ones on the D4 yet.

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.
    Reply With Quote Reply With Quote
  4. 9th April 2015, 04:48 PM #4
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    D4 front height sensors use one for front both sides and another for rear both sides. However Microcat shows that D3s use 4 different height sensors.

    D3 rear wheel speed sensors same as D4 but front, whilst the same left and right, have different part numbers for MY05-06 and MY07-09.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
« D4 side steps | Differences between the D3 SE and HSE? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!