Page 21 of 23 FirstFirst ... 111920212223 LastLast
Results 201 to 210 of 227

Thread: New Jack option.

  1. #201
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Nicky View Post
    Thanks Scott, so this under the front arm will clear the rear wheel for changing?
    No, the process is per corner only.

  2. #202
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    1,201
    Total Downloaded
    0

    Options...

    Has anyone had a look at these?

    Roadsafe Automotive Products, Aftermarket Automotive Products, roadsafe suspension

    There's a couple of top-plate options which could be handy depending on what the jacking point is. I'm just not sure whether there's a /small enough/ heavy duty bottle jack to fit under the car with one of their extensions on it...
    Now 2016 D4 HSE 'Leo' and Steve the Triumph Speed Twin
    Then 2010 D4 3.0 HSE 'James'
    Then 2010 RRS TDV8 'Roger' w traxide DBS, UHF, Cooper Zeons, Superchips remap
    Then 2010 D4 TDV6 'Jumbo' w traxide DBS
    First love 2002 D2 TD5 'Disco Stu'

  3. #203
    Tombie Guest
    That's why the omega 2 stage is the recommended jack - correct closed and open heights New Jack option.

  4. #204
    Join Date
    Aug 2016
    Location
    Melbourne
    Posts
    282
    Total Downloaded
    0
    Quote Originally Posted by g5k View Post
    Pretty sure this is the same trolley jack that has been appearing except marked as 2t instead of 2.25t. Seems to operate in the same range 135mm-400mm, works out to just under $60 with free delivery.

    https://www.aliexpress.com/item/NEW-...711913960.html

    Then also listed on eBay is a very similar looking one, just different colour combo same specs again at $85 or $112 with stands.

    2 Ton 2T Hydraulic Trolley Jack Lifts 2000kg Low Profile Car SUV 4WD Carry Case | eBay

    with stands
    2T Hydraulic Trolley Jack 2000kg + 2X 3 Ton Adjustable Car Jack Stand Heavy Duty | eBay


    I like the idea of this trolley jack as it is compact, has a carry case and only weighs 10kg in the case. How much does the Omega 2 ton jack weigh ? How much weight are you saving with the bottle jack ?
    Attached Images Attached Images

  5. #205
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Garfield View Post
    IHow much does the Omega 2 ton jack weigh ?
    ---
    EDIT: wrong one. it's 5.7kg for the one with extra stroke.
    https://www.blackwoods.com.au/part/0...escopic-hyd-2t

    Cheers,
    Scott

  6. #206
    Join Date
    Aug 2016
    Location
    Melbourne
    Posts
    282
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    ---
    EDIT: wrong one. it's 5.7kg for the one with extra stroke.
    https://www.blackwoods.com.au/part/0...escopic-hyd-2t

    Cheers,
    Scott


    Thanks Scortt. The 4.7kg extra weight maybe worth the stability over the LR scissor jack ( and also bottle jack ) - just pop it under the control arm and don't have to worry about it slipping off. But yes trolley jack bigger to store. If I end up getting a camper trailer, I'll have some where to store it and definitely get a trolley jack. According to trolley jack box measurements, it should fit in my drawers.


    P.S I've just had APT Rock sliders fitted and Ben said I can lift the vehicle using a high lift jack off the sliders. Do you think I could use a trolley jack under the sliders as well ? Any thoughts ?

  7. #207
    Join Date
    Jul 2016
    Location
    SA
    Posts
    95
    Total Downloaded
    0
    I've ended up ordering both, the AliBaba trolley and the Blackwoods bottle.

  8. #208
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Garfield View Post
    Do you think I could use a trolley jack under the sliders as well ? Any thoughts ?
    Probably not. The sliders are higher off the ground than the chassis rail.
    You will use up most of the jack extension just getting up to the slider.

    When away on a trip and fully loaded, I don't want the extra 5kg of the trolley jack when the bottle jack works well anyway.

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  9. #209
    Join Date
    Aug 2016
    Location
    Melbourne
    Posts
    282
    Total Downloaded
    0
    Quote Originally Posted by g5k View Post
    I've ended up ordering both, the AliBaba trolley and the Blackwoods bottle.

    Sounds like a good idea g5k. I'll be interested to hear what you think of the trolley jack once it arrives.


    Scott, you are probably right with sliders sitting too high and trolley jack not having enough reach. Only other option I am considering is an exhaust jack but they too take up quite a bit of storage room .

  10. #210
    Join Date
    Jul 2016
    Location
    SA
    Posts
    95
    Total Downloaded
    0
    Got a msg from Ali and the supplier is out of stock and he wanted to substitute it. If only it was that simple

Page 21 of 23 FirstFirst ... 111920212223 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!