Agree, i'll let you know how they perform once fitted.
CP
The more remote you go the more that strength, particularly in the sidewall becomes important in addition to traction. These are the only LT spec of the 19s (as far as I know).
Cheers,
Scott
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
Agree, i'll let you know how they perform once fitted.
CP
 Master
					
					
						Master
					
					
                                        
					
					
						 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						We've just completed our first real trip on the Maxxis - 2 weeks in the Flinders Ranges - a total of almost 4000 Km (from Canberra).
The D4 towed our 2T van to and from the Flinders, averaging 16 l/Km. The Maxxis are certainly noisier than the original Goodyears on tar but not intrusively so. Steering and braking were not noticeably affected.
Once there, we camped on several stations and did day trips in the D4. The tracks varied from open, dusty, high-range drives to tight, steep, rocky, low-range crawls. We could not fault the tyres on any of the surfaces. A highlight was a day-long drive 'Sky Trek' on Willow Springs Station - well worth the fees.
Widely differing information on tyre pressures led us to use 40/45 on tarmac (pulling the van) and 33/38 on the rough stuff. Seemed to work OK.
regards
David
Hi Scott.
What pressures did you use on the GGR and other gravel? Were you towing? All going well I'm doing the Victoria River district (similar to GRR) and Great Central road (not towing) in June/July.
Won't be towing and have driven those roads before. Know to keep speed down though that's easier in a tdi Defender than one of these rockets.
 Master
					
					
						Master
					
					
                                        
					
					
						Thanks, Scott. I'm glad you had a good experience with your Maxxis. I got them to handle just that kind of traveling with minimal unloading the back of my car to get at the spare. 10k in and Ive only done about 5km on gravelbut with luck this will change. They certainly look the business.
cheers James
 YarnMaster
					
					
						YarnMaster
					
					
                                        
					
					
						I'm still debating whether to change the existing tyres soon or not but will probably leave them on until I plan a decent off road trip. I like Maxxis as I had them on a Prado (17 inchers though) about 5 years ago and they performed well. Much more supple in the side wall than BFGs and you could really feel the difference in ride.
The 19s look to me like they could do with a extra line of tread around them but if they perform well as they are I'll certainly be looking at them later.
I'm following this thread with interest.
AlanH.
As this Maxxis thread has developed into a defacto R19 site, I make this post. After much investigating I ruled out the Maxxis in favour of the new General Grabber AT3 that now replaces their previous AT. I have been waiting for 3 months for the release and hassling various tyre retailers in Perth for availability and finally Richards Tyre Power fitted them yesterday. They have replaced my Pirelli Scorpions ATR after 36k towing a Kimberley Karavan and rears did not stand the abuse very well. From the international reviews I hope the new AT3 may be the sweet spot, for me, between the "soft" Scorpion and the "noisy" Maxxis. I am leaving for the GRR next week so should be able to report in June how they go. The AT3s were quiet and comfortable on metro roads on way home, similar to my old ATRs.
So, I'm gleaning that you decided to go with the General Grabbers because they were a bit more "user friendly" than the Maxxis on the bitumen or are there other reasons? Too late for me I have gone the Maxxis and they are definitely noiser than my (silent) OEM Goodyears. At the time there was not enough info on Grabbers for me to make the call, the Maxxis came out with LT construction just as I was in the market so I took them. A mate has got some General Grabbers on his D4 but that would be the old model. He loves them so far but has not tested them on a rough road. The trip we take along the GCR and then Buchanan Highway in July will be a good comparison and where they get tested. He will be towing a camper trailer but I won't, so it will be good to see how we go.
Honestly if he goes alright on the Grabbers, even if my Maxxis are also good, I will be sorely tempted to put grabbers on next due to the noise of the Maxxis. I don't hate them, but I'll take a quieter tyre that does the job.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks