Thread: Some D4 questions, contemplating purchase

After my Maralinga trip and using it on mine tracks I just have up! By then the stone damage to the rear flares was done...

The biggest F up by Land Rover with Disco would have to be removing the spare wheel.

I told the tyre guys I'll remove it so I get a go on how it operates, I wanted to pour a can of petrol over it and light it, and I had no cargo in the back just a rubber protection mat. What a Bullshyte task❗️

I remember seeing somewhere on here that part from UK that fits in between the seats so you don't have to lift the 3rd row seats.

Also does anyone have it fitted and can you still lift the 3rd row seats with it installed ❓

Maybe I should get the name of it and do a search for the thread ❓

Sent from my iPhone using Forum Runner

Reality check!!!

I've dropped the spare once...
If I hadn't had the wheel carrier it would be twice...

Unless you're bolting draws in which will make it very difficult then a simple CBA suggests it's hardly an imposition and certainly not worth the cost..

is this the one you mean wind-o-matic?

Like most other things there's simple ways to improve things.
You don't need one of those expensive gadgets to access the spare winder with the 3rd row down using a ratchet handle and extension.
Have a read of this thread:
http://www.aulro.com/afvb/l319-disco...extension.html

Cheers,
Scott

My effort. I use this with rear drawers in and/or 3rd row down

Originally Posted by Tombie

Congratulations on the new arrival.
Shoot me a PM and I will get in touch for the LED replacements.

My treat...

If you have any logo puddle lights just hanging around
Of course appropriate compensation would be returned

Originally Posted by Meken

If you have any logo puddle lights just hanging around
Of course appropriate compensation would be returned

Only have a single set and they're already spoken for (reminds me must post them)

Originally Posted by Babs

The biggest F up by Land Rover with Disco would have to be removing the spare wheel.

I told the tyre guys I'll remove it so I get a go on how it operates, I wanted to pour a can of petrol over it and light it, and I had no cargo in the back just a rubber protection mat. What a Bullshyte task❗️

I remember seeing somewhere on here that part from UK that fits in between the seats so you don't have to lift the 3rd row seats.

Also does anyone have it fitted and can you still lift the 3rd row seats with it installed ❓

Maybe I should get the name of it and do a search for the thread ❓

Sent from my iPhone using Forum Runner

I take it you haven't tried the jack yet Babs. Mine came with a Kaymar wheel carrier so I haven't had the pleasure of dealing with the wheel carrier. I have a 100L tank in it's place. The standard jack is the biggest POS I have ever used especially with a 3 tonne car. I now have my highlift permanent mounted on the Kaymar carrier and I use it off the Kaymar or the ARB Bullbar. I always carry a vehicle stand to put under once jacked. I have never had a flat, just had reason to take the wheels off a lot for maintenance issues, brakes, handbrake and bushes.