Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: 2011 D4 - reset "service required" message

  1. #11
    Join Date
    Dec 2009
    Location
    SW WA
    Posts
    345
    Total Downloaded
    0
    Turn ignition on FIRST not third is the way I read it..

    Ignition on is dash lights on and engine not running I would of thought.

  2. #12
    Join Date
    Apr 2016
    Location
    New South Wales
    Posts
    693
    Total Downloaded
    0
    The fact it was listed twice and written two different ways made me think it was a different step.

    Regardless, I appreciate everyone's input but I have tried both ways with no luck.

    I'll take it to landrover and get them to clear it but surely there is a way to do
    It yourself, when these cars are 20years old everyone will home service them and no one is going to want that message constantly on their dash!

  3. #13
    Join Date
    Aug 2015
    Location
    Coolamon, NSW
    Posts
    783
    Total Downloaded
    0
    Quote Originally Posted by Lukeis View Post
    The fact it was listed twice and written two different ways made me think it was a different step.

    Regardless, I appreciate everyone's input but I have tried both ways with no luck.

    I'll take it to landrover and get them to clear it but surely there is a way to do
    It yourself, when these cars are 20years old everyone will home service them and no one is going to want that message constantly on their dash!
    Using an IID Tool/nanocom etc, you can change the CCF so that it no longer appears, therefore no longer needs resetting
    - Justin
    Selling soon - MY10 D4 3.0 TDV6 SE with E-Diff & LLAMS, 265/65R18 Maxxis Razr A/T
    Moved into MY12 L322 4.4 TDV8 Autobiography
    VK2HFJ

  4. #14
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Luke, whoever edited your CCF for the headlight upgrade would be able to reset the service reminder.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  5. #15
    Join Date
    Apr 2016
    Location
    New South Wales
    Posts
    693
    Total Downloaded
    0
    Yep i appreciate that was always an option but I was just hoping for a home solution as they would charge me for it plus it is a little inconvenient for both parties for such a simple task.

    I called Land Rover a moment ago and it sounds like they will do it free of charge this time but I'm still convinced there is a way as it seems strange they would give this ability to only some D4's but not mine.

    Anyway we can end the thread here but if I find a way I'll make sure to post it up!

  6. #16
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Reminds me of another thing that randomly doesn't work on mine.
    It's called Follow Me Home Rear Lights

    Holding down a fob button will turn on the headlights and another press will turn on the reverse lights if FMHRL is enabled.
    The headlight one works but the reverse doesn't, just turns off the headlights.

    Would be quite handy if wanting some light behind the vehicle.
    Doesn't work for mine and apparently not for MY15 either.
    It is enabled in the CCF so it's not that.

    Anyway, maybe this service reset thing disappeared with the push button starter.

    Regards,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  7. #17
    Join Date
    Aug 2015
    Location
    Coolamon, NSW
    Posts
    783
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    Reminds me of another thing that randomly doesn't work on mine.
    It's called Follow Me Home Rear Lights

    Holding down a fob button will turn on the headlights and another press will turn on the reverse lights if FMHRL is enabled.
    The headlight one works but the reverse doesn't, just turns off the headlights.

    Would be quite handy if wanting some light behind the vehicle.
    Doesn't work for mine and apparently not for MY15 either.
    It is enabled in the CCF so it's not that.

    Anyway, maybe this service reset thing disappeared with the push button starter.

    Regards,
    Scott
    Scott, There is a CCF option to use reverse lights with FMH function
    - Justin
    Selling soon - MY10 D4 3.0 TDV6 SE with E-Diff & LLAMS, 265/65R18 Maxxis Razr A/T
    Moved into MY12 L322 4.4 TDV8 Autobiography
    VK2HFJ

  8. #18
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    Just buy a resetting tool from Blackbox Solutions in Cyprus.
    Quote Originally Posted by Lukeis View Post
    I'll take it to landrover and get them to clear it but surely there is a way to do
    It yourself, when these cars are 20years old everyone will home service them and no one is going to want that message constantly on their dash!
    As I said get the special tool - will cost about the same as the dealer resetting your display (they might do it for free but most will charge you an hours labour or at least their min labour charge)
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  9. #19
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Grentarc View Post
    Scott, There is a CCF option to use reverse lights with FMH function
    I'll look into that.
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  10. #20
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    Quote Originally Posted by Grentarc View Post
    Using an IID Tool/nanocom etc, you can change the CCF so that it no longer appears, therefore no longer needs resetting
    My solution too!
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!