Thread: How to adjust D4 MY15 headlights?

The headlights can be adjusted but the adjustment can be difficult to get to. This will change both low and high beam at the same time. When I fitted my HIDs I did not find it necessary to adjust the headlamps though.

I did this upgrade with my D2. I set them as low as possible and was still getting flashed by approaching cars. Others on this forum has said it's illegal to do this conversion as the lens design is different and not suited to HID.

Originally Posted by Milton477

Is there a way to bring the high beam down without also lowering the shutter on the low beam?

No, the adjustment is to the combined unit. WSM section in this thread:
2014+ Facelift Xenon headlights/grill enroute

Exterior Lighting - Headlamp Adjustment
General Procedures
NOTE: With self leveling suspension, make sure the vehicle is at the standard ride height.
NOTE: The headlamp setting is 1.2 % below horizontal and parallel.
NOTE: NAS vehicles have vertical adjustment only.
1. Align the headlamp beam setting equipment to one headlamp.
2. Switch the headlamps on and to dipped beam.
3. NOTE: NAS vehicles have vertical adjustment only.
4. Adjust the headlamps with a Philips screwdriver.
5. Rotate the adjusters A and B by an equal amount for vertical alignment.
6. Rotate the adjusters A or B for horizontal alignment.


Regards,
Scott