Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: trailer hubs available to suit D3, D4 & D5. Kimberley Kampers are advertising them.

  1. #1
    Join Date
    Jan 2010
    Location
    Bunbury WA
    Posts
    125
    Total Downloaded
    0

    trailer hubs available to suit D3, D4 & D5. Kimberley Kampers are advertising them.

    Just notice this comment on Kimberley Kampers promo material:

    Kimberley have released the most powerful disc braking ever with Lightweight ventilated disc braking and dynamic Kimberley calipers.As a comparison these are significantly more powerful than the Alko disc system because of a higher controlled hydraulic pressure.
    • Using Lithium and Superlight solar achieves Weight reduction of: 60kgs -120kgs : easier to tow, longer range



    • Matching Wheels and Tyres for European 120mm PCD standard:
      • Match Landrover Discovery 3, 4 & 5 , Range Rover, Touareg, Amarok.



    Link: 2018 Models off-road caravans and camper trailers released

    Does anyone know what the source of these hubs is? I dont expect Kimberley Kampers to have developed the manufacturing stream for them.

    I have an offroad camper trailer that I wouldn't mind upgrading

    thanks.


  2. #2
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    KK announced some time ago that they were developing such hubs.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  3. #3
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    I think these are the next generation, as they have had hubs available for probably 12 months.

    My dealings with KK is they won't sell you the pets off the shelf for a non KK camper, I tried this the their handbrake for electric over hydraulic brakes.....I needed to provide a VIN number first.

    Your best chance...unless they have changed... would be to find somebody with a KK who is happy for you to use their VIN number and try and buy the parts although I reckon you would have to convince them your upgrading therefore you would need the suspension.

    KK might have changed the business model you may allow you to purchase stubs hubs and brakes.

    Will follow the thread to see how you progress.

  4. #4
    Join Date
    Mar 2013
    Location
    Brisbane
    Posts
    212
    Total Downloaded
    0
    Kimberly have been offering this for a while, as do other trailer manufacturers such as Track:

    Kimberley making 18" wheels for Disco & Range Rover???


    DIY option:
    D3 Rims on a Boat Trailer

  5. #5
    Join Date
    Jan 2010
    Location
    Bunbury WA
    Posts
    125
    Total Downloaded
    0
    ok, thanks, so it looks like KK have gone it alone and developed them. And not buying in someone else's kit.

    Bugger.

    looks like a complete solution, otherwise.

  6. #6
    Tombie Guest
    I’ve fitted D4 PCD hubs to my Crossover.
    Was very easy... trailer hubs available to suit D3, D4 & D5.  Kimberley Kampers are advertising them.

  7. #7
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    I’ve fitted D4 PCD hubs to my Crossover.
    Was very easy... trailer hubs available to suit D3, D4 & D5.  Kimberley Kampers are advertising them.
    where there is a will there is a way....just takes some effort and time.

  8. #8
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    4,335
    Total Downloaded
    0
    I've had hubs engineered before. Wasn't difficult. Old hub as template, specs of required centre bore and PCD of wheels is about all you need.
    A good engineering shop should be able to mill some out of a piece of stock.
    2010 TDV6 3.0L Discovery 4 HSE
    2007 Audi RS4 (B7)

  9. #9
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    1,201
    Total Downloaded
    0
    Are there any knowledge updates on this thread? I was talking wheel matching with a trailer manufacturer recently and amazingly there still doesn't seem to be a widely available off the shelf option...
    Now 2016 D4 HSE 'Leo' and Steve the Triumph Speed Twin
    Then 2010 D4 3.0 HSE 'James'
    Then 2010 RRS TDV8 'Roger' w traxide DBS, UHF, Cooper Zeons, Superchips remap
    Then 2010 D4 TDV6 'Jumbo' w traxide DBS
    First love 2002 D2 TD5 'Disco Stu'

  10. #10
    Join Date
    May 2014
    Location
    Point Cook, VIC
    Posts
    2,472
    Total Downloaded
    0
    Just the Commodore stud pattern you want to ask for. I believe these are easy to source.

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!