Thread: trailer hubs available to suit D3, D4 & D5. Kimberley Kampers are advertising them.

KK announced some time ago that they were developing such hubs.

I think these are the next generation, as they have had hubs available for probably 12 months.

My dealings with KK is they won't sell you the pets off the shelf for a non KK camper, I tried this the their handbrake for electric over hydraulic brakes.....I needed to provide a VIN number first.

Your best chance...unless they have changed... would be to find somebody with a KK who is happy for you to use their VIN number and try and buy the parts although I reckon you would have to convince them your upgrading therefore you would need the suspension.

KK might have changed the business model you may allow you to purchase stubs hubs and brakes.

Will follow the thread to see how you progress.

Kimberly have been offering this for a while, as do other trailer manufacturers such as Track:

Kimberley making 18" wheels for Disco & Range Rover???


DIY option:
D3 Rims on a Boat Trailer

ok, thanks, so it looks like KK have gone it alone and developed them. And not buying in someone else's kit.

Bugger.

looks like a complete solution, otherwise.

I’ve fitted D4 PCD hubs to my Crossover.
Was very easy...

Originally Posted by Tombie

I’ve fitted D4 PCD hubs to my Crossover.
Was very easy...

where there is a will there is a way....just takes some effort and time.

I've had hubs engineered before. Wasn't difficult. Old hub as template, specs of required centre bore and PCD of wheels is about all you need.
A good engineering shop should be able to mill some out of a piece of stock.

Are there any knowledge updates on this thread? I was talking wheel matching with a trailer manufacturer recently and amazingly there still doesn't seem to be a widely available off the shelf option...