Brake switch? On the pedal I mean.
Both my left and brake lights are not working but the high level one is. Bulbs are fine. Looking at the wiring diagrams it looks like all share the same fuses. I might be wrong and probably am. 2008 D3. Any ideas?
Thanks
Sean
Brake switch? On the pedal I mean.
 TopicToaster
					
					
						Subscriber
					
					
						TopicToaster
					
					
						SubscriberI wouldn't think it was the brake switch as I would expect all three brake lights to not work.
I have a new switch so will give it a go.
It's been discussed on both the US and UK forums without resolution. So was hoping someone here might have a solution.
I did replace the alternator on Sunday???
Sean
 TopicToaster
					
					
						Subscriber
					
					
						TopicToaster
					
					
						SubscriberI have this same problem, only found out when a kind motorist pulled up beside me at the lights this morning and told me. Surprised there is no notification on the dash to warn me ?
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Forgot to mention that the bulb has 2 elements and the non brake light element is working fine.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
The brake light filaments in both bulbs look fine.
Will replace the bulbs just in case and see how it goes
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks