Yes Parso, from memory it was a airbag off job. Then take the switch pack out and test the contacts.
A faulty brake light switch is usually associated with christmas lights and fault messages.
Ivan
Yeah I've already fitted a new brake light switch - unless I needed to do something with it before putting it in. The guides said not to touch the end
Yes Parso, from memory it was a airbag off job. Then take the switch pack out and test the contacts.
A faulty brake light switch is usually associated with christmas lights and fault messages.
Ivan
2005 D3, 245/70/17 STmax, Tvan, Traxide, Mitch hitch
I would try cleaning the switch contacts first. People selling cars tend to spray armour all everywhere, to make things shiny. No good for electrical contacts.
cheers
fred
Have you had someone drive behind to check that the brake lights are not flashing on?
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Finally got round to replacing the Cruise Control wiring loom.
Sadly still nothing when I press the buttons. Now to work out if it's the switch pack or the clock spring.
My entertainment controls on the steering wheel became unreliable a few years ago (RRS)
Solved by replacing the "clockspring" Taking the airbag assembly off is straightforward. Disconnect the battery and I allowed an hour to drain any residual charge from the electronics
The bag assembly can be released from the wheel using hooked wires
Dont know if my C/Control works or not never use it.
So I have now replaced the brake light switch, the cruise control pack, the wiring loom, and the clock spring and still no cruise control.
Really not sure where to go now...
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks